RS PRO Incremental Incremental Encoder 30V dc, 4096 ppr ppr, HTL Inverted Signal, Hollow Type, 12 mm Shaft
- N° de stock RS:
- 795-1141
- Fabricant:
- RS PRO
Visuel non contractuel
Sous-total (1 unité)*
388,62 €
(TVA exclue)
470,23 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 1 unité(s) prête(s) à être expédiée(s)
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 388,62 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 795-1141
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Product Type | Incremental Encoder | |
| Encoder Technology | Incremental | |
| Pulses Per Revolution | 4096ppr | |
| Series | RS PRO | |
| Maximum Revolutions | 6000rpm | |
| Output Signal Type | HTL Inverted | |
| Shaft Type | Hollow | |
| Shaft Diameter | 12mm | |
| IP Rating | IP65 | |
| Terminal Type | 8-Pin | |
| Maximum Supply Voltage | 30V dc | |
| Minimum Operating Temperature | -20°C | |
| Overall Depth | 44.5mm | |
| Overall Width | 58mm | |
| Standards/Approvals | CE, EN | |
| Overall Height | 46.5mm | |
| Maximum Operating Temperature | 80°C | |
| Mount Type | Hollow Shaft Flange | |
| Switching Frequency | 200kHz | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Product Type Incremental Encoder | ||
Encoder Technology Incremental | ||
Pulses Per Revolution 4096ppr | ||
Series RS PRO | ||
Maximum Revolutions 6000rpm | ||
Output Signal Type HTL Inverted | ||
Shaft Type Hollow | ||
Shaft Diameter 12mm | ||
IP Rating IP65 | ||
Terminal Type 8-Pin | ||
Maximum Supply Voltage 30V dc | ||
Minimum Operating Temperature -20°C | ||
Overall Depth 44.5mm | ||
Overall Width 58mm | ||
Standards/Approvals CE, EN | ||
Overall Height 46.5mm | ||
Maximum Operating Temperature 80°C | ||
Mount Type Hollow Shaft Flange | ||
Switching Frequency 200kHz | ||
- Pays d'origine :
- DE
RS PRO Incremental Encoder 4096 PPR, Hollow Shaft
If you need to record the rotations per minute (RPM), speed or distance in a high-speed rotating device, turn to this RS PRO incremental encoder. It's built to last as the body is made of sturdy die-cast aluminium. This means you can use it in demanding industrial environments, from manufacturing plants to construction sites.
The part has an Ingress Protection (IP) rating of IP65, meaning it's dust-tight and will resist low-pressure waterjets. It features high noise immunity for error-free communication, ensuring accurate readings. For flexibility in areas where space is limited, it can be mounted on any part of the shaft as it's a through-bore unit.
This encoder is suitable for use on shafts with speeds of up to 6000 rpm (revolutions per minute) and temperatures of up to +80°C. This makes it a good choice for use with a variety of heavy-duty equipment.
Features and Benefits
Liens connexes
- RS PRO Incremental Incremental Encoder 30V dc HTL Inverted Signal 12 mm Shaft
- RS PRO Incremental Incremental Encoder 30V dc HTL Inverted Signal 10 mm Shaft
- RS PRO Incremental Incremental Encoder 30V dc HTL Inverted Signal 6 mm Shaft
- RS PRO Incremental Incremental Encoder 30V dc HTL Inverted Signal 12 mm Shaft
- RS PRO Incremental Incremental Encoder 30V dc HTL Inverted Signal 12 mm Shaft
- RS PRO Incremental Incremental Encoder 30V dc HTL Inverted Signal 12 mm Shaft
- RS PRO Incremental Incremental Encoder 30V dc HTL Inverted Signal 12 mm Shaft
- RS PRO Incremental Incremental Encoder 30V dc HTL Inverted Signal 12 mm Shaft