Références fabricant

SICK MPS Series Position Sensor 30V dc, Analogue Signal

N° de stock RS:: 786-5829
Référence fabricant:: MPS-160TSTP0 / 1050685
Fabricant:: SICK

Sous-total (1 unité)*

342,75 €

(TVA exclue)

414,73 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

Plus 4 unité(s) expédiée(s) à partir du 13 novembre 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	342,75 €

*Prix donné à titre indicatif

N° de stock RS:: 786-5829
Référence fabricant:: MPS-160TSTP0 / 1050685
Fabricant:: SICK

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	SICK
	Product Type	Position Sensor
	Series	MPS
	Output Signal Type	Analogue
	IP Rating	IP67
	Terminal Type	4-Pin M8 Connector
	Maximum Supply Voltage	30V dc
	Minimum Operating Temperature	-20°C
	Overall Depth	14.2mm
	Overall Height	173mm
	Overall Width	13.6mm
	Standards/Approvals	RoHS
	Mount Type	Drop-In
	Maximum Operating Temperature	70°C

	Sélectionner tout
	Marque SICK
	Product Type Position Sensor
	Series MPS
	Output Signal Type Analogue
	IP Rating IP67
	Terminal Type 4-Pin M8 Connector
	Maximum Supply Voltage 30V dc
	Minimum Operating Temperature -20°C
	Overall Depth 14.2mm
	Overall Height 173mm
	Overall Width 13.6mm
	Standards/Approvals RoHS
	Mount Type Drop-In
	Maximum Operating Temperature 70°C

Pays d'origine :: HU

SICK MPS Series Position Sensor, IP67, 30V Maximum Supply Voltage - MPS-160TSTP0 / 1050685

This position sensor provides continuous linear position measurement for pneumatic and profile cylinders in automation environments. It delivers an analogue output for integration with control systems and is designed for use where a sealed enclosure and straightforward electrical connection are required.

Features & Benefits

• Analogue voltage or current outputs enable direct PLC interfacing
• Operating supply range up to 30V supports industrial installations
• IP67-rated enclosure allows use in washdown or dusty environments
• Built-in teach-in simplifies on-site calibration and setup
• Typical resolution 0.03% FSR yields fine position discrimination
• Repeat accuracy 0.06% FSR ensures consistent measurement over cycles

Applications

• Suitable for piston position feedback on T-slot cylinders
• Ideal for integrating with SMC rail-guided actuators
• Used with dovetail groove cylinders for position monitoring
• Can be used for stroke measurement in profile and tie-rod cylinders
• Suitable for machine control requiring analogue displacement signals

What indicator informs about device status during operation?

A front-mounted LED provides immediate operational status and fault indication.

How is the sensor connected electrically in installations?

It uses a four-wire DC connection via an axial cable outlet with an M8 4-pin connector.

What environmental stresses can it withstand mechanically?

The unit tolerates shock up to 30g for 11ms and vibration from 10–55 Hz at 1mm amplitude.

How quickly does the output respond to position changes?

The sensor samples at approximately 1ms intervals, enabling Rapid feedback.

Are there limitations on cable handling in low temperatures?

The attached PUR cable must not be bent below 0°C to avoid damage.

Liens connexes

Soyez le/la premier·ère à être informé de nos nouveautés produits et de nos offres spéciales.

adresse e-mail

Les données personnelles que vous nous fournissez en vous inscrivant à cette liste de diffusion seront traitées conformément à notre politique de confidentialité.