Baumer BDK Series Optical Incremental Encoder 30V dc, 360 ppr ppr, HTL/Push Pull Signal, Solid Type, 6 mm Shaft
- N° de stock RS:
- 498-1852
- Référence fabricant:
- BHK 16.24K360-B6-5
- Fabricant:
- Baumer
Visuel non contractuel
Sous-total (1 unité)*
388,14 €
(TVA exclue)
469,65 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 02 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 388,14 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 498-1852
- Référence fabricant:
- BHK 16.24K360-B6-5
- Fabricant:
- Baumer
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Baumer | |
| Encoder Technology | Optical | |
| Product Type | Incremental Encoder | |
| Pulses Per Revolution | 360ppr | |
| Series | BDK | |
| Maximum Revolutions | 12000rpm | |
| Output Signal Type | HTL/Push Pull | |
| Shaft Type | Solid | |
| Shaft Diameter | 6mm | |
| Interface Type | TTL | |
| Terminal Type | 1 m Cable | |
| IP Rating | IP42 | |
| Maximum Supply Voltage | 30V dc | |
| Minimum Operating Temperature | -20°C | |
| Overall Depth | 34mm | |
| Overall Width | 30mm | |
| Standards/Approvals | UL | |
| Mount Type | Synchro Flange Mount | |
| Maximum Operating Temperature | 85°C | |
| Switching Frequency | 100kHz | |
| Sélectionner tout | ||
|---|---|---|
Marque Baumer | ||
Encoder Technology Optical | ||
Product Type Incremental Encoder | ||
Pulses Per Revolution 360ppr | ||
Series BDK | ||
Maximum Revolutions 12000rpm | ||
Output Signal Type HTL/Push Pull | ||
Shaft Type Solid | ||
Shaft Diameter 6mm | ||
Interface Type TTL | ||
Terminal Type 1 m Cable | ||
IP Rating IP42 | ||
Maximum Supply Voltage 30V dc | ||
Minimum Operating Temperature -20°C | ||
Overall Depth 34mm | ||
Overall Width 30mm | ||
Standards/Approvals UL | ||
Mount Type Synchro Flange Mount | ||
Maximum Operating Temperature 85°C | ||
Switching Frequency 100kHz | ||
- Pays d'origine :
- CH
BHK hollow shaft miniature encoders
Range of economical miniature hollow-shaft encoders featuring a tightening clamp.
Shaft end or through-mounting.
3-channel output. Through-shaft.
Plastic housing with aluminium flange.
Low-profile mount.
Cable output.
Kubler
Push pull interface with inverted signals
Short circuit protection
Age and temperature compensation
Liens connexes
- Baumer BDK Series Optical Incremental Encoder 30V dc HTL/Push Pull Signal 5 mm Shaft
- Baumer BHK Series Optical Incremental Encoder 30V dc HTL/Push Pull Signal 12 mm Shaft
- Baumer BHK Series Optical Incremental Encoder 30V dc HTL/Push Pull Signal 6 mm Shaft
- Baumer BHK Series Optical Incremental Encoder 30V dc HTL/Push Pull Signal 6 mm Shaft
- Baumer BHK Series Optical Incremental Encoder 30V dc HTL/Push Pull Signal 6 mm Shaft
- Baumer BDK Series Optical Incremental Encoder 30V dc HTL/Push Pull Signal 5 mm Shaft
- Baumer BDK Series Optical Incremental Encoder 30V dc HTL/Push Pull Signal 5 mm Shaft
- Baumer BDK Series Optical Incremental Encoder 30V dc HTL/Push Pull Signal 5 mm Shaft