Solartron Metrology LVDT

Sous-total (1 unité)*

636,30 €

(TVA exclue)

769,92 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
Temporairement en rupture de stock
  • 1 unité(s) expédiée(s) à partir du 25 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +636,30 €

*Prix donné à titre indicatif

N° de stock RS:
495-0909
Référence fabricant:
911315-RS
Fabricant:
Solartron Metrology
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Solartron Metrology

Product Type

LVDT

IP Rating

IP43

Standards/Approvals

No

Maximum Operating Temperature

60°C

Statut RoHS : Exempté

Pays d'origine :
GB

OD5 Conditioning Module


External PSU used, allows OD5 case to be smaller and isolates the mains voltage to make it safer

120Va.c. or 240Va.c. operation and suitable for use with all a.c. LVDTs and most others

Wide range span and zero control with both -10 to 10V and -20 to 20mA outputs

Gain and offset adjustment fully independent

Selectable transducer excitation frequency and load resistances

Forward and reverse connection selection, saves swapping wires in the connector

Housed in a robust die cast aluminium box with a 5-pin DIN connector

Half-bridge transducers accommodated with a simple plug wiring change

Linear Variable Differential Transformers (LVDT)


These devices comprise a movable nickel iron core and three coils - one for energisation and two for pick-up. They need to be driven by a sine wave to produce an output amplitude and phase directly proportional to the position of the core with respect to the pick-up coils. A phase sensitive detector is required to demodulate the output signal. The main advantages of LVDTs are;

No wear problems as with potentiometers

Infinite resolution, high accuracy and linearity

No friction introduced into the measured system

Available in ranges from ±1mm to ±50mm

Supplied with

Instructions and 5-pin DIN plug.

Liens connexes