SICK SKS36 Series Safety Encoder Encoder, 128ppr ppr, Sin/Cos Signal, Knurled Type, 8mm Shaft

Voir la catégorie

Sous-total (1 unité)*

198,31 €

(TVA exclue)

239,96 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 4 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
  • Plus 2 unité(s) expédiée(s) à partir du 12 janvier 2026
  • Plus 3 unité(s) expédiée(s) à partir du 09 février 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +198,31 €

*Prix donné à titre indicatif

N° de stock RS:
284-9273
Référence fabricant:
SKS36-HFA0-K02 / 1034095
Fabricant:
SICK
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

SICK

Encoder Technology

Safety Encoder

Pulses Per Revolution

128ppr

Series

SKS36

Maximum Revolutions

4096rpm

Output Signal Type

Sin/Cos

Shaft Type

Knurled

Shaft Diameter

8mm

Supply Voltage

7 → 12 V dc

IP Rating

IP50

Interface

HIPERFACE

Overall Height

45mm

Overall Width

45mm

Overall Depth

40mm

Minimum Operating Temperature

-20°C

Mounting Type

Spring Mounting Plate

Maximum Operating Temperature

+110°C

Current Rating

60 mA

Connection Type

Male Connector

Pays d'origine :
DE

Overview


The motor feedback systems have a rotary communication interface and are designed for absolute single turn integration. They have a safety system and an optical technology, with an operating temperature range of -20°C to +110°C. The encoder represents the inaugural offering of a new generation of optical motor feedback systems. With 128 sine/cosine signals per revolution, this family sets the standard among MFB systems with a HIPERFACE interface. A notable feature of this generation is its exceptionally small code disk, with a mere 2 mm code track radius, enabling comprehensive scanning. This system compensates for inevitable eccentricity errors in the code disk, ball bearing, and shaft encountered in conventional systems. Moreover, the placement of the code disk in the middle of the rotary axle eliminates limitations on high angular speeds imposed by the code disk.

It offers absolute position indication with an increment number of 4,096 increments per revolution and a maximum of 4,096 revolutions. Key features of this product family include the storage of motor-specific data in the electronic type label and programmability. Certified to SIL2/PL d standards, these motor feedback systems meet current safety technology requirements and streamline the certification process.

At a glance


Motor feedback systems for the standard performance range
128 sine/cosine periods per revolution
Absolute position with a resolution of 4,096 increments per revolution and 4,096 revolutions with the multiturn system
Programming of the position value and electronic type label
Integrated version and stand-alone design
Conforms to RoHs

Your Benefit


The small dimension allows manufacturers of low-power and minimal-power motors to considerably reduce the size of their motors
The stand-alone version is ideally suited as a master and path encoders
The SKS/SKM36 motor feedback systems have strongly penetrated the drive technology market
The consistent mechanical components in SEK/SEL37 allow for a high degree of flexibility with various encoder systems

Applications


Motion monitoring via HIPERFACE

Note


Liens connexes