SICK Absolute Absolute Encoder, 262144 ppr, Ethernet IP Signal, Blind Hollow Type, 15mm Shaft
- N° de stock RS:
- 201-3658
- Référence fabricant:
- AFS60A-BHIB262144 / 1055360
- Fabricant:
- SICK
Sous-total (1 unité)*
803,86 €
(TVA exclue)
972,67 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Temporairement en rupture de stock
- Expédition à partir du 26 janvier 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 803,86 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 201-3658
- Référence fabricant:
- AFS60A-BHIB262144 / 1055360
- Fabricant:
- SICK
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SICK | |
| Encoder Technology | Absolute | |
| Pulses Per Revolution | 262144 | |
| Maximum Revolutions | 6000rpm | |
| Output Signal Type | Ethernet IP | |
| Shaft Type | Blind Hollow | |
| Supply Voltage | 10 → 30 V dc | |
| Shaft Diameter | 15mm | |
| Resolution | 18 Bit | |
| Steps Per Revolution | 262144Steps | |
| IP Rating | IP65 | |
| Interface | Ethernet/IP | |
| Overall Width | 60mm | |
| Overall Depth | 71.5mm | |
| Sélectionner tout | ||
|---|---|---|
Marque SICK | ||
Encoder Technology Absolute | ||
Pulses Per Revolution 262144 | ||
Maximum Revolutions 6000rpm | ||
Output Signal Type Ethernet IP | ||
Shaft Type Blind Hollow | ||
Supply Voltage 10 → 30 V dc | ||
Shaft Diameter 15mm | ||
Resolution 18 Bit | ||
Steps Per Revolution 262144Steps | ||
IP Rating IP65 | ||
Interface Ethernet/IP | ||
Overall Width 60mm | ||
Overall Depth 71.5mm | ||
- Pays d'origine :
- DE
The SICK Ethernet IP absolute encoder provides accurate speed and position data for motion control applications. An integrated web server makes commissioning easy. 5 multi coloured LED's on the encoder housing provide visual status information and a 32 bit fault header can be enabled in the data transfer to provide the PLC with status information on every scan of the process data. IP addresses can be assigned via DHCP or a pre-defined range can be selected using the DIP switches. The base encoder resolution is 262144 steps/turn but this can be configured via the webserver or PLC integration software tool. Inbuilt switches and the Device Level Ring (DLR) protocol enable use in Line, Star or Ring topologies.
Supply voltage 10 to 30V DC
Data transmission rate (baud rate) is 10 Mbit/s to 100 Mbit/s
Operating torque is 0.6 Ncm
Data transmission rate (baud rate) is 10 Mbit/s to 100 Mbit/s
Operating torque is 0.6 Ncm
Liens connexes
- SICK Absolute Absolute Encoder Ethernet IP Signal 15mm Shaft
- SICK AFS60 Series Absolute Absolute Encoder Hollow Type, 15mm Shaft
- SICK Absolute Absolute Encoder Ethernet IP Signal 10mm Shaft
- SICK Absolute Absolute Encoder, 262144 ppr
- SICK AFM60 Series Absolute Absolute Encoder Blind Hollow Type, 12mm Shaft
- SICK AFM60 Series Absolute Absolute Encoder Ethernet IP Signal 14mm Shaft
- Allen Bradley 842E Series Absolute Absolute Encoder Analogue Hollow Type, 1/4in Shaft
- SICK AFM60 Series Absolute Absolute Encoder Blind Hollow Type, 10mm Shaft
