onsemi, 2 Monostable Multivibrator ECL, 8-Pin SOIC
- N° de stock RS:
- 186-9164P
- Référence fabricant:
- MC100EL32DG
- Fabricant:
- onsemi
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 186-9164P
- Référence fabricant:
- MC100EL32DG
- Fabricant:
- onsemi
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | onsemi | |
| Logic Family | ECL | |
| Product Type | Monostable Multivibrator | |
| Number of Elements per Chip | 2 | |
| Minimum Supply Voltage | 4.2V | |
| Mount Type | Surface | |
| Maximum Supply Voltage | 5.7V | |
| Package Type | SOIC | |
| Minimum Operating Temperature | -40°C | |
| Multivibrator Type | Divider | |
| Maximum Propagation Delay Time @ CL | 510ps | |
| Pin Count | 8 | |
| Maximum Operating Temperature | 85°C | |
| Height | 1.5mm | |
| Length | 5mm | |
| Width | 4 mm | |
| Series | MC100EL32 | |
| Standards/Approvals | No | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque onsemi | ||
Logic Family ECL | ||
Product Type Monostable Multivibrator | ||
Number of Elements per Chip 2 | ||
Minimum Supply Voltage 4.2V | ||
Mount Type Surface | ||
Maximum Supply Voltage 5.7V | ||
Package Type SOIC | ||
Minimum Operating Temperature -40°C | ||
Multivibrator Type Divider | ||
Maximum Propagation Delay Time @ CL 510ps | ||
Pin Count 8 | ||
Maximum Operating Temperature 85°C | ||
Height 1.5mm | ||
Length 5mm | ||
Width 4 mm | ||
Series MC100EL32 | ||
Standards/Approvals No | ||
Automotive Standard No | ||
- Pays d'origine :
- PH
The MC10EL/100EL32 is an integrated divide by 2 divider. The differential clock inputs and the VBB allow a differential, single-ended or AC coupled interface to the device. If used, the VBB output should be bypassed to ground with a 0.01 F capacitor. Also note that the VBB is designed to be used as an input bias on the EL32 only, the VBB output has limited current sink and source capability. The reset pin is asynchronous and is asserted on the rising edge. Upon power-up, the internal flip-flop will attain a random state, the reset allows for the synchronization of multiple EL32's in a system. The 100 Series contains temperature compensation.
510ps Propagation Delay
3.0GHz Toggle Frequency
ESD Protection: > 1 KV HBM, > 100 V MM
PECL Mode Operating Range: VCC= 4.2 V to 5.7 V with VEE= 0 V
NECL Mode Operating Range: VCC= 0 V with VEE= -4.2 V to -5.7 V
Internal Input Pulldown Resistors on CLK(s) and R.
Moisture Sensitivity Level 1
Transistor Count = 82 devices
Applications
Phase Lock Loops