Nexperia 74HC123PW-Q100,118, 2 Dual Monostable Multivibrator 74HC 5.2 mA, 16-Pin TSSOP
- N° de stock RS:
- 153-2888
- Référence fabricant:
- 74HC123PW-Q100,118
- Fabricant:
- Nexperia
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 153-2888
- Référence fabricant:
- 74HC123PW-Q100,118
- Fabricant:
- Nexperia
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Nexperia | |
| Logic Family | 74HC | |
| Product Type | Dual Monostable Multivibrator | |
| Number of Elements per Chip | 2 | |
| Maximum High Level Output Current | -5.2mA | |
| Maximum Low Level Output Current | 5.2mA | |
| Minimum Pulse Width | 26ns | |
| Maximum Quiescent Current | 160μA | |
| Minimum Supply Voltage | 2V | |
| Mount Type | Surface | |
| Package Type | TSSOP | |
| Maximum Supply Voltage | 6V | |
| Multivibrator Type | Monostable Multivibrator | |
| Minimum Operating Temperature | -40°C | |
| Maximum Propagation Delay Time @ CL | 80ns | |
| Pin Count | 16 | |
| Maximum Operating Temperature | 125°C | |
| Standards/Approvals | JEDEC No. 7A | |
| Length | 5.1mm | |
| Series | 74HC | |
| Height | 0.95mm | |
| Automotive Standard | AEC-Q101 | |
| Sélectionner tout | ||
|---|---|---|
Marque Nexperia | ||
Logic Family 74HC | ||
Product Type Dual Monostable Multivibrator | ||
Number of Elements per Chip 2 | ||
Maximum High Level Output Current -5.2mA | ||
Maximum Low Level Output Current 5.2mA | ||
Minimum Pulse Width 26ns | ||
Maximum Quiescent Current 160μA | ||
Minimum Supply Voltage 2V | ||
Mount Type Surface | ||
Package Type TSSOP | ||
Maximum Supply Voltage 6V | ||
Multivibrator Type Monostable Multivibrator | ||
Minimum Operating Temperature -40°C | ||
Maximum Propagation Delay Time @ CL 80ns | ||
Pin Count 16 | ||
Maximum Operating Temperature 125°C | ||
Standards/Approvals JEDEC No. 7A | ||
Length 5.1mm | ||
Series 74HC | ||
Height 0.95mm | ||
Automotive Standard AEC-Q101 | ||
Dual retriggerable monostable multivibrator with reset, The 74HC123-Q100, 74HCT123-Q100 are high-speed Si-gate CMOS devices and are pin compatible with Low-power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC123-Q100, 74HCT123-Q100 are dual retriggerable monostable multivibrators with output Pulse width control by three methods, The Basic Pulse is defined by the selection of the external resistor (REXT) and capacitor (CEXT). Once triggered, the Basic output Pulse width may be extended by retriggering the gated Active LOW-going edge input (nA) or the Active HIGH-going edge input (nB).
Automotive product qualification in accordance with AEC-Q100 (Grade 1)
DC triggered from Active HIGH or Active LOW inputs
Retriggerable for very long pulses up to 100 % duty factor
Direct reset terminates output Pulse
Schmitt trigger action on all inputs except for the reset input
Liens connexes
- Nexperia 16-Pin TSSOP
- Nexperia 74HC123PW 2 Dual Monostable Multivibrator HC 4 mA, 16-Pin TSSOP
- Nexperia 16-Pin TSSOP
- Nexperia 16-Pin TSSOP
- Nexperia 74HC4538PW 2 Dual Monostable Multivibrator HC 5.2 mA, 16-Pin TSSOP
- Texas Instruments CD74HC4538PWR 16-Pin TSSOP
- Texas Instruments CD74HC123PWR 16-Pin TSSOP
- onsemi MC74HC4538ADG 16-Pin SOIC
