Phoenix Contact Voltage Monitoring Relay, 3 Phase, DPDT, DIN Rail
- N° de stock RS:
- 890-3887
- Référence fabricant:
- 2905597
- Fabricant:
- Phoenix Contact
Offre groupée disponible
Sous-total (1 unité)*
118,61 €
(TVA exclue)
143,52 €
(TVA incluse)
Unité | Prix par unité |
|---|---|
| 1 - 4 | 118,61 € |
| 5 - 9 | 115,01 € |
| 10 + | 111,26 € |
*Prix donné à titre indicatif
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 4 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 2 unité(s) expédiée(s) à partir du 15 décembre 2025
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
- N° de stock RS:
- 890-3887
- Référence fabricant:
- 2905597
- Fabricant:
- Phoenix Contact
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Phoenix Contact | |
| Monitoring Application | Voltage | |
| Electrical Phase | 3 | |
| Contact Configuration | DPDT | |
| Voltage Sensitivity | Undervoltage | |
| Mounting Type | DIN Rail | |
| Phase Sensitivity | Phase Failure, Phase Sequence | |
| Frequency Sensing Range | 48 → 63Hz | |
| Series | EMD-SL-PH-690 | |
| Minimum Operating Temperature | -25°C | |
| Width | 22.5mm | |
| Maximum Operating Temperature | +70°C | |
| Height | 90mm | |
| Maximum Frequency Sensed | 63Hz | |
| Length | 113mm | |
| Number of Poles | 2 | |
| Special Features | 2PDT, Adjustable Response Delay, Phase Failure Monitoring, Phase Sequence Monitoring, Undervoltage Monitoring | |
| Terminal Type | Screw | |
| Minimum Frequency Sensed | 48Hz | |
| Dimensions | 113 x 22.5 x 90mm | |
| Operating Temperature Range | +70°C | |
| Sélectionner tout | ||
|---|---|---|
Marque Phoenix Contact | ||
Monitoring Application Voltage | ||
Electrical Phase 3 | ||
Contact Configuration DPDT | ||
Voltage Sensitivity Undervoltage | ||
Mounting Type DIN Rail | ||
Phase Sensitivity Phase Failure, Phase Sequence | ||
Frequency Sensing Range 48 → 63Hz | ||
Series EMD-SL-PH-690 | ||
Minimum Operating Temperature -25°C | ||
Width 22.5mm | ||
Maximum Operating Temperature +70°C | ||
Height 90mm | ||
Maximum Frequency Sensed 63Hz | ||
Length 113mm | ||
Number of Poles 2 | ||
Special Features 2PDT, Adjustable Response Delay, Phase Failure Monitoring, Phase Sequence Monitoring, Undervoltage Monitoring | ||
Terminal Type Screw | ||
Minimum Frequency Sensed 48Hz | ||
Dimensions 113 x 22.5 x 90mm | ||
Operating Temperature Range +70°C | ||
- Pays d'origine :
- AT
EMD Monitoring Relays
This range of multifunctional monitoring relays allows to monitor electrical as well as physical system parameters.
EMD Monitoring Relays can measure:
EMD Monitoring Relays can measure:
Currents
Voltages, 1- and 3-phase
Phase sequences
Real powers
Loads, cos φ
Motor winding temperatures
Fill levels
Voltages, 1- and 3-phase
Phase sequences
Real powers
Loads, cos φ
Motor winding temperatures
Fill levels
Phoenix Contact Voltage Monitoring Relay, 177 to 794V AC Input, 48 to 63Hz Frequency Sensing - EMD-SL-PH-690 - 2905597
Looking for a way to ensure safe voltages in your electrical setup? Choose this voltage monitoring relay from Phoenix Contact. It uses built-in colour-coded LEDs to alert you to power supply issues like undervoltage, phase failure or phase asymmetry, so monitoring is simple. It's designed for mounting in any position on a DIN rail for simple and versatile installation.
The terminal block has a fast-blow 5A fuse that instantly breaks the circuit in the event of an excessively high current, helping to protect you and your equipment against dangerous power surges. To suit the needs of your system, you can set a response delay time between 0.1 and 10s. Thanks to its broad input voltage range of 177 to 794V AC, this unit is suitable for use in a wide variety of electrical setups.
The terminal block has a fast-blow 5A fuse that instantly breaks the circuit in the event of an excessively high current, helping to protect you and your equipment against dangerous power surges. To suit the needs of your system, you can set a response delay time between 0.1 and 10s. Thanks to its broad input voltage range of 177 to 794V AC, this unit is suitable for use in a wide variety of electrical setups.
• Adheres to IEC 60664-1 standards for insulation
• Robust service life of up to 20 million mechanical cycles for long-lasting performance
• Compact dimensions of 90 (height) x 22.5 (width) x 113mm (depth) to take up minimal space on a DIN rail
• Robust service life of up to 20 million mechanical cycles for long-lasting performance
• Compact dimensions of 90 (height) x 22.5 (width) x 113mm (depth) to take up minimal space on a DIN rail
Liens connexes
- Phoenix Contact Voltage Monitoring Relay DPDT, DIN Rail
- Tele Phase 3 Phase DIN Rail
- RS PRO Phase 3 Phase DIN Rail
- GIC Voltage Monitoring Relay DPDT, DIN Rail
- Tele Voltage Monitoring Relay DPDT, DIN Rail
- Tele Phase 1 DPDT, DIN Rail
- RS PRO Voltage Monitoring Relay DPDT, DIN Rail
- Hiquel Voltage Monitoring Relay DPDT, DIN Rail
