ABB Monitoring Relay, 3 Phase, DPDT, DIN Rail
- N° de stock RS:
- 775-8040
- Référence fabricant:
- 1SVR740885R1300 CM-MPS.11P
- Fabricant:
- ABB
Visuel non contractuel
Sous-total (1 unité)*
243,81 €
(TVA exclue)
295,01 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 1 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 243,81 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 775-8040
- Référence fabricant:
- 1SVR740885R1300 CM-MPS.11P
- Fabricant:
- ABB
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ABB | |
| Product Type | Monitoring Relay | |
| Function | Multifunction | |
| Electrical Phase | 3 | |
| Contact Configuration | DPDT | |
| Mount Type | DIN Rail | |
| Switching Voltage | 24V | |
| Terminal Type | Push-in | |
| IP Rating | IP20, IP50 | |
| Minimum Operating Temperature | -25°C | |
| Maximum Operating Temperature | 60°C | |
| Width | 22.5mm | |
| Height | 85.6mm | |
| Series | CM-MPS | |
| Length | 103.7mm | |
| Standards/Approvals | C-Tick, EN 50178, CB scheme, RMRS, UL 508, GOST, 2006/95/EC, CCC, IEC/EN 60255-6, 2004/108/EC, GL, 2002/95/EC, CAN/CSA C22.2 No.14, CE | |
| Sélectionner tout | ||
|---|---|---|
Marque ABB | ||
Product Type Monitoring Relay | ||
Function Multifunction | ||
Electrical Phase 3 | ||
Contact Configuration DPDT | ||
Mount Type DIN Rail | ||
Switching Voltage 24V | ||
Terminal Type Push-in | ||
IP Rating IP20, IP50 | ||
Minimum Operating Temperature -25°C | ||
Maximum Operating Temperature 60°C | ||
Width 22.5mm | ||
Height 85.6mm | ||
Series CM-MPS | ||
Length 103.7mm | ||
Standards/Approvals C-Tick, EN 50178, CB scheme, RMRS, UL 508, GOST, 2006/95/EC, CCC, IEC/EN 60255-6, 2004/108/EC, GL, 2002/95/EC, CAN/CSA C22.2 No.14, CE | ||
- Pays d'origine :
- DE
CM-MPS x3 Multifunctional Three-Phase Monitoring Relays
The CM-MPSx3 are multifunctional monitoring relays for three-phase mains. They monitor the phase parameters phase sequence, phase failure, over- and undervoltage and phase unbalance. CM-MPS.23 also monitors the neutral for interruption. The threshold values for over and undervoltage and phase unbalance are adjustable. CM-MPS.23 is also suitable for monitoring single-phase mains. For this, all three external conductors (L1, L2, L3) have to be jumpered and connected as one single conductor. Phase sequence monitoring has to be deactivated and the threshold value for phase unbalance has to be set to the maximum (25 %).
Monitoring of three-phase mains for phase sequence (can be switched off), phase failure, over and undervoltage as well as phase unbalance
Automatic phase sequence correction configurable
Interrupted neutral monitoring possible with CM-MPS.23
CM-MPS.23 can also be used to monitor single-phase mains
Can be used for mains with a frequency of 45 to 440 Hz
Threshold values for phase unbalance, over- and undervoltage are adjustable as absolute values
Tripping delay can be adjusted or switched off by means of a logarithmic scale
ON-delayed or OFF-delayed tripping delay selectable
Powered by the measuring circuit
True RMS measuring principle
1x2 or 2x1 c/o (SPDT) contact configurable
3 LEDs for status indication