ABB Monitoring Relay, 1 Phase, DPDT, DIN Rail, 0.3A to 15A, 240 V dc, 240V ac
- N° de stock RS:
- 775-8018
- Référence fabricant:
- 1SVR730841R1500 CM-SRS.22S
- Fabricant:
- ABB
Visuel non contractuel
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
Produit de remplacement
Ce produit n'est pas disponible actuellement. Voici notre produit de remplacement:
la pièce
188,87 €
(TVA exclue)
228,53 €
(TVA incluse)
- N° de stock RS:
- 775-8018
- Référence fabricant:
- 1SVR730841R1500 CM-SRS.22S
- Fabricant:
- ABB
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ABB | |
| Product Type | Monitoring Relay | |
| Electrical Phase | 1 | |
| Contact Configuration | DPDT | |
| Mount Type | DIN Rail | |
| Minimum Current Sensed | 0.3A | |
| Switching Voltage | 240V | |
| Power Consumption | 0.75W | |
| Maximum Current Sensed | 15A | |
| Current Sensitivity | Overcurrent, Undercurrent | |
| Terminal Type | Screw | |
| IP Rating | IP20 | |
| Supply DC Voltage | 240 V dc | |
| Minimum Operating Temperature | -20°C | |
| Supply AC Voltage | 240V ac | |
| Maximum Operating Temperature | 60°C | |
| Width | 22.5mm | |
| Standards/Approvals | RoHS | |
| Height | 85.6mm | |
| Series | CM-SRS | |
| Length | 103.7mm | |
| Sélectionner tout | ||
|---|---|---|
Marque ABB | ||
Product Type Monitoring Relay | ||
Electrical Phase 1 | ||
Contact Configuration DPDT | ||
Mount Type DIN Rail | ||
Minimum Current Sensed 0.3A | ||
Switching Voltage 240V | ||
Power Consumption 0.75W | ||
Maximum Current Sensed 15A | ||
Current Sensitivity Overcurrent, Undercurrent | ||
Terminal Type Screw | ||
IP Rating IP20 | ||
Supply DC Voltage 240 V dc | ||
Minimum Operating Temperature -20°C | ||
Supply AC Voltage 240V ac | ||
Maximum Operating Temperature 60°C | ||
Width 22.5mm | ||
Standards/Approvals RoHS | ||
Height 85.6mm | ||
Series CM-SRS | ||
Length 103.7mm | ||
- Pays d'origine :
- DE
CM-SRS Current Monitoring, Single Phase AC/DC
Depending on the configuration, the current monitoring relays CM-SRS.1 and CM-SRS.2 can be used for over- or undercurrent monitoring in single-phase AC and/or DC systems. The current to be monitored (measured value) is applied to terminals B1/B2/B3-C. The devices work according the open-circuit principle.
If the measured value exceeds resp. drops below the adjusted threshold value, the output relay(s) energize(s): on the CM-SRS.1 immediately, on the CM-SRS.2 after the set tripping delay TV.
Monitoring of DC- and AC-currents: CM-SRS.x1: 3mA - 1A and CM-SRS.x2: 0.3-15A
RMS measuring principle
One device includes 3 measuring ranges
Over- or undercurrent monitoring configurable
Hysteresis adjustable from 3-30%
Tripping delay TV adjustable 0.1-30s
CM-SRS.1: 1 c/o contact
CM-SRS.2: 2 c/o contacts
22.5mm width
3 LED's for status indication
Liens connexes
- ABB Monitoring Relay DPDT 0.3A to 15A 240V ac
- ABB Monitoring Relay SPDT 0.3A to 15A 240V ac
- ABB Monitoring Relay DPDT 0.1mA to 100mA 240V ac
- Eaton Monitoring Relay CO 0.3A to 15A 240 V ac
- Eaton Monitoring Relay DIN Rail 24 to 240 V ac 240 V ac
- Schneider Electric Monitoring Relay DPDT 0.15A to 15A 240V ac
- Dold Monitoring Relay DPDT 0.1A to 15A 240 V ac
- Schneider Electric Monitoring Relay DPDT 150mA to 15A 240 V ac