Références fabricant

Dold Monitoring Relay, 2 CO, DIN Rail to 15mA, 24 V dc, 230V ac

N° de stock RS:: 327-7663
Référence fabricant:: IL9151.12 2- 50kOHM DC24V 0.2-20S
Fabricant:: Dold

Dold Monitoring Relay, 2 CO, DIN Rail to 15mA, 24 V dc, 230V ac

Sous-total (1 unité)*

200,12 €

(TVA exclue)

242,15 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

Stocké-e par le fabricant

Prêt à être expédié à partir du 22 mai 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	200,12 €

*Prix donné à titre indicatif

N° de stock RS:: 327-7663
Référence fabricant:: IL9151.12 2- 50kOHM DC24V 0.2-20S
Fabricant:: Dold

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Dold
	Product Type	Monitoring Relay
	Contact Configuration	2 CO
	Mount Type	DIN Rail
	Power Consumption	2VA
	Maximum Current Sensed	15mA
	Terminal Type	Flat
	Time Delay	0.2 → 20s
	IP Rating	IP40, IP20
	Supply AC Voltage	230V ac
	Minimum Operating Temperature	-20°C
	Supply DC Voltage	24 V dc
	Maximum Operating Temperature	60°C
	Height	90mm
	Length	59mm
	Standards/Approvals	CE, CCC
	Series	IL 9151
	Width	35mm

	Sélectionner tout
	Marque Dold
	Product Type Monitoring Relay
	Contact Configuration 2 CO
	Mount Type DIN Rail
	Power Consumption 2VA
	Maximum Current Sensed 15mA
	Terminal Type Flat
	Time Delay 0.2 → 20s
	IP Rating IP40, IP20
	Supply AC Voltage 230V ac
	Minimum Operating Temperature -20°C
	Supply DC Voltage 24 V dc
	Maximum Operating Temperature 60°C
	Height 90mm
	Length 59mm
	Standards/Approvals CE, CCC
	Series IL 9151
	Width 35mm

Pays d'origine :: DE

IL9151 - level relay with two separately operating changeovers

The IL9151 is used for

Level monitoring and control of conductive liquids and powders, e.g. maximum and minimum fill level, protection against overfilling and dry running

Monitoring and control of the mix ratio for conductive liquids

General resistance monitoring tasks, e.g. recording temperature limits with PTC

Contact protection relay with delay

Features

In accordance with IEC 255, VDE 0435 Section 303

3 electrode connections for 2-point or 1-point level control

The measuring circuit galvanically isolated from the mains is immune from high levels of interference

Max. lead length to the electrodes: 1500 m

Wide setting range of 4 → 450 kΩ, which enables differentiation between liquid and foam

Response and fallback delay: 0.2 → 20 s adjustable separately for MIN and MAX level

Programmable for: 2 separately controlled output relays for MIN and MAX level or jointly controlled output relays in 2-point hysteresis level control

Programmable for: Operating or rest current principle

Measuring circuit for electrodes works on AC voltage generated internally in the device (approx. 30 Hz); therefore no electrolysis occurrence in the fluid

LEDs to indicate operational readiness and contact position

2 output relays each with 1 changeover

35 mm overall width

Liquid Level Relays are used to monitor the levels of conductive liquids, and are available in Up/Down, Minimum, Maximum, and Fill/Empty variations. Liquid Level Relays are straightforward to install and safe to use.

Application Examples

Liquid Level Relays (Conductive Level Sensors) are used in a wide variety of applications including waste water management and the monitoring and management of corrosive liquid media, and designed specifically to provide for the:

Monitoring and control of liquid levels

Protection of pumps against dry running

Ability to detect liquid leaks in a system

Control of media mixing ratios

Control of liquid levels