Siemens Monitoring Relay, SPDT, DIN Rail, 24V ac 24 V dc
- N° de stock RS:
- 255-0872
- Référence fabricant:
- 3UG45822AW31
- Fabricant:
- Siemens
Sous-total (1 unité)*
496,92 €
(TVA exclue)
601,27 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stocké-e par le fabricant
- Prêt à être expédié à partir du 29 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 496,92 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 255-0872
- Référence fabricant:
- 3UG45822AW31
- Fabricant:
- Siemens
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Siemens | |
| Product Type | Monitoring Relay | |
| Contact Configuration | SPDT | |
| Mount Type | DIN Rail | |
| IP Rating | IP20 | |
| Supply AC Voltage | 24V ac | |
| Minimum Operating Temperature | -25°C | |
| Contact Current | 4A | |
| Supply DC Voltage | 24 V dc | |
| Maximum Operating Temperature | 60°C | |
| Standards/Approvals | RoHS | |
| Series | 3UG4 | |
| Sélectionner tout | ||
|---|---|---|
Marque Siemens | ||
Product Type Monitoring Relay | ||
Contact Configuration SPDT | ||
Mount Type DIN Rail | ||
IP Rating IP20 | ||
Supply AC Voltage 24V ac | ||
Minimum Operating Temperature -25°C | ||
Contact Current 4A | ||
Supply DC Voltage 24 V dc | ||
Maximum Operating Temperature 60°C | ||
Standards/Approvals RoHS | ||
Series 3UG4 | ||
- Pays d'origine :
- DE
The Siemens Insulation monitoring relays are used for monitoring the insulation resistance between ungrounded 1- or 3-phase AC supplies and a protective conductor. They measure insulation resistances between system cables and system ground. If the value falls below the threshold value, the output relays are switched to fault status. With these devices, which are suitable for both AC and DC networks, a pulsed test signal is fed into the network to be monitored and the isolation resistance is determined. The pulsed test signal changes its form according to insulation resistance and network loss capacitance. The changed form is used to predict the changed insulation resistance.
Monitoring of setting errors
Integrated system test after start-up
Resetting and testing option
New predictive measurement principle allows very fast response times
Liens connexes
- Siemens Monitoring Relay DIN Rail, 24V ac 24 V dc
- Omron Monitoring Relay DIN Rail 24 V 24V
- Tempatron Monitoring Relay DIN Rail, 24V ac 24 V dc
- Tele Monitoring Relay SPDT 24V ac 24 V dc
- Finder Monitoring Relay SPDT 24V ac 24 V dc
- Lovato Monitoring Relay DIN Rail, 24V ac
- Omron Monitoring Relay SPDT 24V ac 24 V dc
- Omron Monitoring Relay SPDT 24V 24 V dc