Dold DIN Rail Time Switch Monitoring Relay

Sous-total (1 unité)*

73,19 €

(TVA exclue)

88,56 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 1 unité(s) prête(s) à être expédiée(s)
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +73,19 €

*Prix donné à titre indicatif

N° de stock RS:
240-8888
Référence fabricant:
IK8715/003 6-40A
Fabricant:
Dold
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Dold

Product Type

DIN Rail Time Switch Monitoring Relay

Standards/Approvals

No

Pays d'origine :
DE

IK8715 / 003 — Load-Shedding Relay


Reduces the cable cross-sections required for large electrical consumers

17.5 mm overall width

The IK8715 load-shedding relay is used in installation facilities where the cable cross sections are too low to enable two large electrical consumers to be operated together. This is often the case in domestic installations, where, for example, a through-flow heater for hot water is to be installed alongside the electric storage heaters. Employing the IK8715 means that the electrical connection does not need to be dimensioned for the simultaneous operation of both large consumers. Furthermore, the connection fee calculated according to the maximum amount of power available (German federal tariff regulation [BTO] §P6 section 4) can be reduced. If the device working for a short period (e.g. the through-flow heater) is switched on, the load-shedding relay switches off the consumer that operates over a longer period (e.g. the overnight storage heater).

Liens connexes

Soyez le/la premier·ère à être informé de nos nouveautés produits et de nos offres spéciales.

adresse e-mail

Les données personnelles que vous nous fournissez en vous inscrivant à cette liste de diffusion seront traitées conformément à notre politique de confidentialité.