RS PRO Phase, Voltage Monitoring Relay, 3 Phase, SPDT, DIN Rail
- N° de stock RS:
- 102-6137
- Fabricant:
- RS PRO
3 En stock, livraison sous 1 jour(s) (stock Europe)
30 En stock, livraison sous 3 à 5 jours (stock Europe)
Ajouté
Prix la pièce
85,25 €
(TVA exclue)
103,15 €
(TVA incluse)
| Unité | Prix par unité |
| 1 - 4 | 85,25 € |
| 5 - 9 | 81,83 € |
| 10 - 24 | 80,99 € |
| 25 + | 76,72 € |
- N° de stock RS:
- 102-6137
- Fabricant:
- RS PRO
Documentation technique
Législations et de normes
- Pays d'origine :
- GB
Détails du produit
RS PRO Phase, Voltage Monitoring Relay With SPDT Contacts, 3 Phase, Overvoltage, Undervoltage
Need to protect equipment from failures caused by overvoltage and undervoltage? Try this three-phase monitoring relay from RS PRO. This component comes with microprocessor technology that's able to take measurements of phase-to-phase voltages and break the connection in the circuit if the voltage gets too high or low.
It's quick and easy to adjust the relay to suit your needs. The minimum voltage requirement can be changed to 380 V for undervoltage and 500 V for instances of overvoltage. There's also a time delay that will stop tripping when there are temporary dips in voltage.
It's quick and easy to adjust the relay to suit your needs. The minimum voltage requirement can be changed to 380 V for undervoltage and 500 V for instances of overvoltage. There's also a time delay that will stop tripping when there are temporary dips in voltage.
Features and Benefits
- Single Pole Double Throw (SPDT) contact configuration
- Dimensions of 17.5 (width) x 66.5 (length) x 89 mm (height)
- Three phases
- Frequency sensing range of 48 to 63 Hz
- Operating temperature range of -20°C to +60°C
- Voltage sensing range of 300 to 380 V (undervoltage), 420 to 500 V (overvoltage)
- Phase and voltage monitoring application
- DIN rail mounting type
- One pole
- Phase failure and phase sequence sensitivity
- Special features include two LEDs for the indication of operational states, detection of incorrect phase sequence and phase loss, fixed time delay, fixed undervoltage trip level, measurement of phase-to-phase voltages, microprocessor-based relay, monitoring of own supply to detect an undervoltage condition on one or more phases, true RMS (Rotronic Monitoring System) monitoring
- Meets CE, EMC (electromagnetic compatibility) EN 61000-6, IEC standards
- Supply voltage of 400 V AC
- Screw terminal type
- Time delay of 0.2 to 10 s
- Overvoltage and undervoltage sensitivity
Spécifications
Attribut | Valeur |
|---|---|
| Monitoring Application | Phase, Voltage |
| Electrical Phase | 3 |
| Contact Configuration | SPDT |
| Voltage Sensitivity | Overvoltage, Undervoltage |
| Mounting Type | DIN Rail |
| Phase Sensitivity | Phase Failure, Phase Sequence |
| Time Delay | 0.2 → 10s |
| Frequency Sensing Range | 48 → 63Hz |
| Series | L |
| Number of Poles | 1 |
| Special Features | 2 LEDs for the Indication of Operational States, Adjustment for Time Delay, Adjustment for Undervoltage Trip Level, Detects Incorrect Phase Sequence & Phase Loss, Measures Phase to Phase Voltages, Microprocessor Based Relay, Monitors Own Supply & Detects an Undervoltage Condition on One or more Phases, True RMS Monitoring |
| Maximum Operating Temperature | +60°C |
| Dimensions | 17.5 x 66.5 x 89mm |
| Width | 17.5mm |
| Minimum Operating Temperature | -20°C |
| Operating Temperature Range | +60°C |
| Length | 66.5mm |
| Height | 89mm |
| Terminal Type | Screw |