Tele Monitoring Relay, 1, 3 Phase, 400 V ac Monitor Range, 2 CO, DIN Rail, 230V ac
- N° de stock RS:
- 618-805
- Référence fabricant:
- G4CM690V16ATL20 230VAC
- Fabricant:
- Tele
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 618-805
- Référence fabricant:
- G4CM690V16ATL20 230VAC
- Fabricant:
- Tele
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Tele | |
| Product Type | Monitoring Relay | |
| Function | Motor Control, Monitoring | |
| Electrical Phase | 1, 3 | |
| Contact Configuration | 2 CO | |
| Mount Type | DIN Rail | |
| Switching Voltage | 250V ac | |
| Power Consumption | 2.5VA | |
| IP Rating | IP20, IP40 | |
| Monitoring Voltage Range | 400 V ac | |
| Minimum Operating Temperature | -25°C | |
| Contact Current | 8A | |
| Supply AC Voltage | 230V ac | |
| Maximum Operating Temperature | 55°C | |
| Width | 45mm | |
| Series | GAMMA | |
| Standards/Approvals | IEC 60721-3-3 Class 3K3, IEC 60068-1, UL 508, EN 60255-22-2, VBG 4, WEEE, IEC 60947-5-1, EN 60255-27, EN 60947-8, IEC 60664-1, EN 60255-22-1, EN 60715 | |
| Height | 103mm | |
| Length | 9mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Tele | ||
Product Type Monitoring Relay | ||
Function Motor Control, Monitoring | ||
Electrical Phase 1, 3 | ||
Contact Configuration 2 CO | ||
Mount Type DIN Rail | ||
Switching Voltage 250V ac | ||
Power Consumption 2.5VA | ||
IP Rating IP20, IP40 | ||
Monitoring Voltage Range 400 V ac | ||
Minimum Operating Temperature -25°C | ||
Contact Current 8A | ||
Supply AC Voltage 230V ac | ||
Maximum Operating Temperature 55°C | ||
Width 45mm | ||
Series GAMMA | ||
Standards/Approvals IEC 60721-3-3 Class 3K3, IEC 60068-1, UL 508, EN 60255-22-2, VBG 4, WEEE, IEC 60947-5-1, EN 60255-27, EN 60947-8, IEC 60664-1, EN 60255-22-1, EN 60715 | ||
Height 103mm | ||
Length 9mm | ||
- Pays d'origine :
- AT
The Tele Multifunctional power factor monitoring relay designed for 1 or 3 phase electrical systems. Measuring just 22.5mm in width, it offers digital settings and features such as overload, underload, minimum, maximum, and window monitoring, along with fault latch capabilities and recognition of disconnected loads. The device also includes temperature monitoring for motor windings, supporting up to six PTC sensors. It is suitable for variable frequency drives (VFDs) operating at frequencies between 10 to 100Hz.
Self extinguishing plastic housing
IP40 and IP20 protection rated
Vibration and shock resistance
Mounted on DIN Rail TS 35 according to EN 60715
Liens connexes
- Tele Monitoring Relay DIN Rail 230V ac
- Tele Monitoring Relay 2 CO, DIN Rail 230V ac
- Tele Monitoring Relay 3 Phase 2 CO 24V ac, 240 V ac
- Tele Monitoring Relay 3 Phase 2 CO 24V ac, 240 V ac
- Tele Monitoring Relay 3 Phase 2 CO 24V ac, 240 V ac
- Tele Monitoring Relay 400 V ac Monitor Range DIN Rail, 400V ac
- Tele Monitoring Relay SPDT 400V ac
- Tele Monitoring Relay 1 CO, DIN Rail
