ATMI Liquid Level Monitoring Relay, 220V ac
- N° de stock RS:
- 565-277
- Référence fabricant:
- AT50A
- Fabricant:
- ATMI
Sous-total (1 unité)*
110,24 €
(TVA exclue)
133,39 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 2 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 110,24 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 565-277
- Référence fabricant:
- AT50A
- Fabricant:
- ATMI
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ATMI | |
| Monitoring Application | Liquid Level | |
| Voltage Sensing Range | 220V ac | |
| Voltage Sensitivity | Overvoltage, Undervoltage, Voltage Differential | |
| Sélectionner tout | ||
|---|---|---|
Marque ATMI | ||
Monitoring Application Liquid Level | ||
Voltage Sensing Range 220V ac | ||
Voltage Sensitivity Overvoltage, Undervoltage, Voltage Differential | ||
- Pays d'origine :
- FR
G9SB, Safety Relays, Ultra Slim
The Omron G9SB series is an ultra slim safety relay available in either a 17.5mm or 22.5mm housing. The 17.5mm units have 2 or 3 safety contacts and the 22.5mm units have 3 safety contacts and an auxiliary contact.
1 and 2 input channel units
Manual and automatic reset units
Certification up to category 4 according to EN954-1 (depending on the application)
Can also be used with safety sensors F3SN, F3SH, F3S-B, F3STGR, F3SL, F3S-J
Conforms to EN standards (TUV approval)
Manual and automatic reset units
Certification up to category 4 according to EN954-1 (depending on the application)
Can also be used with safety sensors F3SN, F3SH, F3S-B, F3STGR, F3SL, F3S-J
Conforms to EN standards (TUV approval)
Note
When ordering take note of the safety reset mode that is required: Models G9SB**A and G9SB ** B = Auto Reset operation; Models G9SB ** D = Manual Reset operation
Approvals
EN954-1, EN60204-1, UL508, CSA C22.2 No. 14
The ATMI level control relay model allows you to work with liquids of normal conductivity, highly conductive liquids, or liquids whose conductivity can vary up to 100 Ω. This device allows you to adjust the sensitivity of the device with its potentiometer to meet the needs of the application. The way to optimize these characteristics is to position the AT 50 A according to the indicated wiring diagram, with the probes in the desired positions to control the controlled equipment.
Sensitivity is adjustable up to 100 kOhm
Response time is 100 ms
Power consumption is 5 VA
Response time is 100 ms
Power consumption is 5 VA
Liens connexes
- RS PRO Liquid Level Monitoring Relay 150 → 260V ac, DIN Rail
- Schneider Electric Liquid Level Monitoring Relay DIN Rail
- ABB Liquid Level Monitoring Relay SPST
- RS PRO Voltage Monitoring Relay 220V ac, DIN Rail
- Level Monitoring Relay SPDT DIN Rail
- Crouzet Level Monitoring Relay 24 → 240V ac, DIN Rail
- Siemens Level Monitoring Relay, SPDT
- Level Monitoring Relay DPDT DIN Rail
