RS PRO Microwave Ceiling Microwave Detector

Voir la catégorie

Sous-total (1 unité)*

371,28 €

(TVA exclue)

449,25 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 7 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +371,28 €

*Prix donné à titre indicatif

N° de stock RS:
796-2071
Fabricant:
RS PRO
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

RS PRO

Product Type

Ceiling Microwave Detector

Radiation Type

Microwave

Power Source

Mains

Minimum Operating Temperature

-10°C

Maximum Frequency

50Hz

Height

86mm

Standards/Approvals

No

Width

45.5 mm

Length

86mm

Maximum Operating Temperature

35°C

Weight

100g

Ceiling Mounted Microwave Presence Detector


This series of microwave presence detector switches are designed to provide automatic control of lighting, heating or ventilation loads. The switch detects movement using a highly sensitive microwave detector. This works by emitting low power microwave signals and measuring the reflections as the signals bounce of moving objects. The microwave presence detector is optimised for ceiling mounting applications to give detection over long distances.

When movement is detected the load is turned on. When an area is no longer occupied the load will switch off after an adjustable time out period.

The internal light sensor provides additional energy saving in lighting applications. When an area is occupied lighting is only switched on when the level of natural light is below a preset level.

The /IP variant of these products is sealed to IP66

Microwave Sensor detects movement

Receives commands from an IR handset

Light level sensor measures light level

Presence detection

Occupancy Lighting Controllers


Lighting controllers designed for use within offices and warehouses. Available with dual sensors for detecting ambient light and physical movement. Outputs are in the form of switch contacts (standard types). A dimming control output version is available for use with electronic ballasts. This can control up to 10 ballasts, ideal where daylight compensation is required with constant ambient light.

Liens connexes