Audio-Technica Microphone Condenser, 14 kHz
- N° de stock RS:
- 809-1183
- Référence fabricant:
- PRO42
- Fabricant:
- Audio-Technica
Sous-total (1 unité)*
125,05 €
(TVA exclue)
151,31 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 5 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 125,05 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 809-1183
- Référence fabricant:
- PRO42
- Fabricant:
- Audio-Technica
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Audio-Technica | |
| Product Type | Microphone | |
| Sub Type | Condenser | |
| Directionality/Polar Pattern | Uni-Directional | |
| Maximum Sound Pressure Level | 134dB | |
| Impedance | 100Ω | |
| Sensitivity | -38dB | |
| On/Off Switch | Yes | |
| Cable Included | Yes | |
| Length | 54.3mm | |
| Weight | 35g | |
| Maximum Frequency Response | 14kHz | |
| Width | 36.6 mm | |
| Height | 15.5mm | |
| Standards/Approvals | No | |
| Minimum Frequency Response | 70Hz | |
| Connector Type | XLR | |
| Sélectionner tout | ||
|---|---|---|
Marque Audio-Technica | ||
Product Type Microphone | ||
Sub Type Condenser | ||
Directionality/Polar Pattern Uni-Directional | ||
Maximum Sound Pressure Level 134dB | ||
Impedance 100Ω | ||
Sensitivity -38dB | ||
On/Off Switch Yes | ||
Cable Included Yes | ||
Length 54.3mm | ||
Weight 35g | ||
Maximum Frequency Response 14kHz | ||
Width 36.6 mm | ||
Height 15.5mm | ||
Standards/Approvals No | ||
Minimum Frequency Response 70Hz | ||
Connector Type XLR | ||
- Pays d'origine :
- JP
Miniature Boundary Microphone
Miniature Boundary Microphones designed for surface mounted applications. Ideal for times when minimum visibility is required.
Permanently attached miniature cable
Charge fixed on the back plate
2 microns thick gold vaporized diaphragm
Microphone enclosed in a sturdy case protected by perforated steel
Rubber non slip bottom pad
Low profile housing with low reflectance black finish
High sensitivity ensures useful output matching most mixer, tape recorder and amplifier inputs
Note
Avoid leaving microphone in open sunlight or where temperature exceed + 43°C for long periods. This can cause output level reduction.
Liens connexes
- Audio-Technica Wired Hanging Microphone, 70 Hz → 16 kHz
- Audio-Technica Wired Gooseneck Microphone, 70 Hz → 16 kHz
- Audio-Technica Wired Gooseneck Microphone, 7 Hz → 16 kHz
- Audio-Technica Wired Microphone Mounting Plate
- RS PRO Wired Lavalier Microphone, 70 Hz → 17 kHz
- RS PRO Wired Hand Held Microphone, 70 Hz → 14 kHz
- Audio-Technica Microphones
- Audio-Technica, 7 → 16 kHz
