Microchip, 8 bit PIC, PIC16F Microcontroller, 32 MHz, 14kB FLASH, 14-Pin PDIP

Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
N° de stock RS:
905-3224
Référence fabricant:
PIC16F1615-I/P
Fabricant:
Microchip
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Microchip

Product Type

Microcontroller

Series

PIC16F

Package Type

PDIP

Mount Type

Through Hole

Pin Count

14

Device Core

PIC

Data Bus Width

8bit

Interface Type

NVMREG

Program Memory Size

14kB

Maximum Clock Frequency

32MHz

RAM Size

1.024kB

Maximum Supply Voltage

5.5V

Analogue Comparators

2

Minimum Operating Temperature

-40°C

DACs

1 x 5 Bit

Number of Programmable I/Os

26

Maximum Power Dissipation Pd

800mW

Maximum Operating Temperature

85°C

Length

19.56mm

Height

5.33mm

Standards/Approvals

RoHS

Width

7.11mm

Minimum Supply Voltage

1.8V

Automotive Standard

No

Instruction Set Architecture

RISC

Program Memory Type

FLASH

ADCs

8 x 10 Bit

Number of Timers

7

PIC16F1615/1619 8-Bit Flash Microcontrollers


The PIC16F range of Microcontrollers from Microchip are 8-bit MCUs that incorporate Microchip’s PIC® architecture into a variety of pin and package options.

PIC16F1615/1619 Microcontrollers are based on Microchip’s Enhanced Mid-Range core and integrate a variety of peripherals that make these devices suitable for a wide variety of general purpose and small motor control applications.

Microcontroller Features


32 MHz Max. CPU Speed

49 Instructions

16 Level Hardware Stack

Internal Oscillator

12 or 18 I/O Pins

Power-On Reset (POR)

Power-Up Timer (PWRT)

Brown-Out Reset (BOR)

Windowed Watchdog Timer (WWDT)

In-Circuit Serial Programming (ICSP)

In-Circuit Debug (ICD)

Low-Voltage Programming (LVP)

Peripheral Features


10-bit Analogue to Digital Converter (ADC) – PIC16F1615 8 Channels; PIC16F1619 12 Channel

8-Bit Digital-to-Analogue Converter (DAC)

Voltage Reference

Zero-Cross Detect (ZCD)

Two Capture/Compare/PWM (CCP) Modules

Two Comparators

Two 24-bit Signal Measurement Timers (SMT)

Angular Timer

Cyclic Redundancy Check with Memory Scan (CRC/SCAN)

Math Accelerator with Proportional-Integral-Derivative (PID)

Zero Cross Detector

Voltage Reference Module

Four 8-bit Timers with Hardware Limit Timer (HLT)

Three 16-bit Timers

Peripheral Pin Select (PPS)

Complimentary Waveform Generator (CWG)

Two Configurable Logic Cell (CLC)

Enhanced USART (EUSART)

SPI/I2C Serial Communications

Liens connexes

Soyez le/la premier·ère à être informé de nos nouveautés produits et de nos offres spéciales.

adresse e-mail

Les données personnelles que vous nous fournissez en vous inscrivant à cette liste de diffusion seront traitées conformément à notre politique de confidentialité.