Microchip DSPIC33EP64MC202-I/SS, 16bit dsPIC Microcontroller, DSPIC33EP, 140MHz, 64 kB Flash, 28-Pin SSOP

Indisponible
RS n'aura plus ce produit en stock.
Options de conditionnement :
N° de stock RS:
824-6386
Référence fabricant:
DSPIC33EP64MC202-I/SS
Fabricant:
Microchip
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Microchip

Family Name

DSPIC33EP

Package Type

SSOP

Mounting Type

Surface Mount

Pin Count

28

Device Core

dsPIC

Data Bus Width

16bit

Program Memory Size

64 kB

Maximum Frequency

140MHz

RAM Size

8 kB

USB Channels

0

Number of PWM Units

4

Number of SPI Channels

2

Number of USART Channels

0

Number of UART Channels

2

Typical Operating Supply Voltage

3 → 3.6 V

Number of I2C Channels

2

Number of CAN Channels

0

Maximum Number of Ethernet Channels

0

Number of ADC Units

1

Minimum Operating Temperature

-40 °C

Instruction Set Architecture

DSP

Pulse Width Modulation

4 x 16 bit, 6 (Motor Control)

Maximum Operating Temperature

+85 °C

Length

10.5mm

ADCs

1(6 x 10bit)/1(6 x 12bit)

Height

1.85mm

Number of LIN Channels

0

Width

5.6mm

Dimensions

10.5 x 5.6 x 1.85mm

Program Memory Type

Flash

Number of Ethernet Channels

0

Number of PCI Channels

0

dsPIC33EPxxxGP/MC20x/50x 16-Bit Digital Signal Controllers


The dsPIC33EPxxxGP/MC20x/50x family of Digital Signal Controllers from Microchip is a comprehensive range of 16-bit DSPs based upon the dsPIC33E core, offering up to 70MIPS performance. The range has an extensive array memory and package variants, all offering a large variety of on board peripherals.

Microcontroller Features


70 MHz Max. CPU Speed
21 to 53 I/O Pins – Model Dependant
Power-On Reset (POR)
Power-Up Timer (PWRT)
Oscillator Start-Up Timer (OST)
Brown-Out Reset (BOR)
Extended Watchdog Timer (WDT)
High/Low-Voltage Detection (HLVD) Module
In-Circuit Serial Programming (ICSP)
In-Circuit Debug (ICD)

Peripherals


High-Speed PWM
10/12-Bit Analogue-to-Digital Converter (ADC) - 6 to 16 Channels Depending on Model
Five 16-Bit Timers
Two 32-Bit Timers
Operational Amplifier – 2 to 3 Depending on Model
Comparators – 3 to 4 Depending on Model
Charge Time Measurement Unit (CTMU) – Supports mTouch™ Capacitive Touch Sensing
Two UART Modules
Two SPI Modules
ECAN™ Module
Two I2C™ Modules
Programmable Cyclic Redundancy Check (CRC)
Peripheral Pin Select (PPS)
Peripheral Trigger Generator (PTG)

Liens connexes