Microchip ARM Cortex, SAM D21/DA1 Microcontroller, 48 MHz, 128kB FLASH, 32-Pin TQFP
- N° de stock RS:
- 236-8840P
- Référence fabricant:
- ATSAMD21E17A-AU
- Fabricant:
- Microchip
Offre groupée disponible
Sous-total 10 unités (conditionné en plateau)*
24,12 €
(TVA exclue)
29,19 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 485 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 10 - 20 | 2,412 € |
| 25 - 45 | 2,236 € |
| 50 - 95 | 2,188 € |
| 100 + | 2,148 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 236-8840P
- Référence fabricant:
- ATSAMD21E17A-AU
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Product Type | Microcontroller | |
| Series | SAM D21/DA1 | |
| Package Type | TQFP | |
| Pin Count | 32 | |
| Device Core | ARM Cortex | |
| Program Memory Size | 128kB | |
| Interface Type | I2S, SERCOM, USB 2.0 | |
| Maximum Clock Frequency | 48MHz | |
| Maximum Supply Voltage | 3.63V | |
| Analogue Comparators | 4 | |
| DACs | 10 Bit | |
| Number of Programmable I/Os | 52 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Standards/Approvals | AEC-Q100 | |
| Minimum Supply Voltage | 1.62V | |
| Number of Timers | 16 | |
| Program Memory Type | FLASH | |
| Automotive Standard | AEC-Q100 Grade 1, AEC-Q100 Grade 2 | |
| Instruction Set Architecture | Thumb, Arm Cortex | |
| ADCs | 12 bit | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Product Type Microcontroller | ||
Series SAM D21/DA1 | ||
Package Type TQFP | ||
Pin Count 32 | ||
Device Core ARM Cortex | ||
Program Memory Size 128kB | ||
Interface Type I2S, SERCOM, USB 2.0 | ||
Maximum Clock Frequency 48MHz | ||
Maximum Supply Voltage 3.63V | ||
Analogue Comparators 4 | ||
DACs 10 Bit | ||
Number of Programmable I/Os 52 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Standards/Approvals AEC-Q100 | ||
Minimum Supply Voltage 1.62V | ||
Number of Timers 16 | ||
Program Memory Type FLASH | ||
Automotive Standard AEC-Q100 Grade 1, AEC-Q100 Grade 2 | ||
Instruction Set Architecture Thumb, Arm Cortex | ||
ADCs 12 bit | ||
The Microchip low power microcontrollers using the 32-bit Arm® Cortex®-M0+ processor, and32-pinswith up to 256 KB Flash and 32 KB of SRAM. It operates at a maximum frequency of 48 MHz and reach 2.46 CoreMark/MHz. They are designed for simple and intuitive migration with identical peripheral modules, hex compatible code, identical linear address map, and pin compatible migration paths between all devices in the product series. All devices include intelligent and flexible peripherals, Event System for inter-peripheral signalling, and support for capacitive touch button, slider, and wheel user interfaces.
External interrupt controller (EIC)
16 external interrupts
One non maskable interrupt (NMI)
Two pin serial wire debug (SWD) programming, test and debugging interface
Low power consumption
Idle and Standby Sleep modes
SleepWalking peripherals
12 Channel Direct memory access controller (DMAC)
12 Channel Event System
Up to five 16-bit trimer/counters
One 16-bit TC with two compare/capture channels
One 8 bit TC with two compare/capture channels
One 32-bit TC with two compare/capture channels, by using two TCs