Unité

sélectionner ou taper la quantité

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Microchip
	Product Type	Microcontroller
	Series	PIC18F47Q10
	Package Type	QFN
	Mount Type	Surface
	Pin Count	40
	Device Core	PIC
	Data Bus Width	8bit
	Program Memory Size	128kB
	Maximum Clock Frequency	64MHz
	RAM Size	3.62MB
	Maximum Supply Voltage	5.5V
	DACs	1 x 5 Bit
	Number of Programmable I/Os	36
	Minimum Operating Temperature	-40°C
	Analogue Comparators	2
	Maximum Operating Temperature	85°C
	Standards/Approvals	RoHS
	Height	0.85mm
	Length	5mm
	Width	5 mm
	Minimum Supply Voltage	1.8V
	Instruction Set Architecture	Harvard
	Automotive Standard	No
	ADCs	35 x 10 Bit
	Program Memory Type	FLASH
	Number of Timers	3/4

	Sélectionner tout
	Marque Microchip
	Product Type Microcontroller
	Series PIC18F47Q10
	Package Type QFN
	Mount Type Surface
	Pin Count 40
	Device Core PIC
	Data Bus Width 8bit
	Program Memory Size 128kB
	Maximum Clock Frequency 64MHz
	RAM Size 3.62MB
	Maximum Supply Voltage 5.5V
	DACs 1 x 5 Bit
	Number of Programmable I/Os 36
	Minimum Operating Temperature -40°C
	Analogue Comparators 2
	Maximum Operating Temperature 85°C
	Standards/Approvals RoHS
	Height 0.85mm
	Length 5mm
	Width 5 mm
	Minimum Supply Voltage 1.8V
	Instruction Set Architecture Harvard
	Automotive Standard No
	ADCs 35 x 10 Bit
	Program Memory Type FLASH
	Number of Timers 3/4

PIC18 Core with 83 Instructions, 31 Stack Levels

Internal 64MHz oscillator

Operating Voltage Range:’F’ Version (1.8V – 5.5V)

Temperature Range:Industrial Version (-40C to 85C)Extended Version (-40C to 125C)

128 KB Flash Program Memory with self read/write capability

3728 Bytes Data SRAM Memory

1024 Bytes of EEPROM

10-bit ADC with computation, 35 channels

8 x Configurable Logic Cell (CLC)

1 x 5-bit DAC

2 x Comparators

Fixed Voltage Reference (FVR) module 1.024V, 2.048V and 4.096V output levels

Hardware Capacitive Voltage Divider (CVD) for mTouch buttons/sliders

1 x Zero-Cross Detect

2 x I2C/SPI

2 x EUSART with LIN support

CRC with Memory Scan

Windowed Watchdog Timer (WWDT)

1 x Hardware Limit Timer (HLT)

1 x Complementary Waveform Generator

2 x standalone 10-bit PWM modules

2 x Capture/Compare/PWM modules

Three 8-bit Timers/Counters

Four 16-bit Timers/Counters

1 x Hardware Limit Timer (HLT)

Extended Watchdog Timer (WDT)

Doze, Idle, and Sleep Power Saving Operating Modes

Low Current Power-on Reset (POR)

Brown-out Reset (BOR)

Low-Power BOR (LPBOR)

Peripheral Pin Select

In-Circuit Debug Integrated On-Chip

In-Circuit Serial Programming (ICSP) via Two Pins

Microchip PIC18F47Q10-I/MP, 8 bit PIC, PIC18F47Q10 Microcontroller, 64 MHz, 128kB FLASH, 40-Pin QFN

Liens connexes