Microchip, 8 bit AVR, ATTINY404 Microcontroller, 20 MHz, 4kB FLASH, 14-Pin SOIC

Sous-total (1 tube de 56 unités)*

28,952 €

(TVA exclue)

35,056 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • Plus 392 unité(s) expédiée(s) à partir du 15 décembre 2025
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
le tube*
56 +0,517 €28,95 €

*Prix donné à titre indicatif

N° de stock RS:
193-6226
Référence fabricant:
ATTINY404-SSN
Fabricant:
Microchip
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Microchip

Series

ATTINY404

Product Type

Microcontroller

Package Type

SOIC

Mount Type

Surface

Pin Count

14

Device Core

AVR

Data Bus Width

8bit

Program Memory Size

4kB

Maximum Clock Frequency

20MHz

RAM Size

256bit

Maximum Supply Voltage

5.5V

Minimum Operating Temperature

-40°C

Number of Programmable I/Os

12

Analogue Comparators

1

Maximum Operating Temperature

125°C

Width

3.9 mm

Length

8.74mm

Standards/Approvals

RoHS

Height

1.5mm

Minimum Supply Voltage

1.8V

Program Memory Type

FLASH

ADCs

10 x 10 Bit

Automotive Standard

No

Number of Timers

2

Instruction Set Architecture

RISC

The ATtiny404 is a microcontroller using the 8-bit AVR® processor with hardware multiplier, running at up to 20MHz and 4KB Flash, 256B SRAM and 128 bytes of EEPROM in a 14-pin package. The series uses the latest technologies from Microchip with a flexible and low power architecture including Event System and SleepWalking, accurate analog features and advanced peripherals.

8-bit high-performance AVR RISC CPU

135 instructions

Hardware multiplier

Ultra Low Power (ULP)

Three sleep modes

Idle

Standby

Power Down

6 Channels Event System

Configurable Custom Logic (CCL)

12 Channel 10-bit ADC with Voltage Reference

Comparators

2x 16-bit Timer (TCA / TCB)

Cyclical Redundancy Check (CRC/SCAN)

Watchdog Timer (WDT)

Power-On Reset (POR)

Brown-Out Detection (BOD)

Single pin programming and debugging interface (UPDI)

Operation Voltage: 1.8V – 5.5V

Liens connexes