Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	STMicroelectronics
	Family Name	STM32F0
	Package Type	LQFP
	Mounting Type	Surface Mount
	Pin Count	48
	Device Core	ARM Cortex M0
	Data Bus Width	32bit
	Program Memory Size	128 kB
	Maximum Frequency	48MHz
	RAM Size	16 kB
	USB Channels	1
	Number of SPI Channels	2
	Typical Operating Supply Voltage	2.4 → 3.6 V
	Number of I2C Channels	2
	Number of USART Channels	4
	ADCs	12 x 12 bit
	Number of ADC Units	1
	Program Memory Type	Flash
	Minimum Operating Temperature	-40 °C
	Dimensions	7.2 x 7.2 x 1.45mm
	Instruction Set Architecture	RISC
	Width	7.2mm
	Height	1.45mm
	Length	7.2mm
	Maximum Operating Temperature	+85 °C

	Sélectionner tout
	Marque STMicroelectronics
	Family Name STM32F0
	Package Type LQFP
	Mounting Type Surface Mount
	Pin Count 48
	Device Core ARM Cortex M0
	Data Bus Width 32bit
	Program Memory Size 128 kB
	Maximum Frequency 48MHz
	RAM Size 16 kB
	USB Channels 1
	Number of SPI Channels 2
	Typical Operating Supply Voltage 2.4 → 3.6 V
	Number of I2C Channels 2
	Number of USART Channels 4
	ADCs 12 x 12 bit
	Number of ADC Units 1
	Program Memory Type Flash
	Minimum Operating Temperature -40 °C
	Dimensions 7.2 x 7.2 x 1.45mm
	Instruction Set Architecture RISC
	Width 7.2mm
	Height 1.45mm
	Length 7.2mm
	Maximum Operating Temperature +85 °C

Core: ARM® 32-bit Cortex®-M0 CPU, frequency up to 48 MHz

Memories

32 to 128 Kbytes of Flash memory

6 to 16 Kbytes of SRAM with HW parity

CRC calculation unit

Reset and power management

Digital & I/Os supply: VDD= 2.4 V to 3.6 V

Analog supply: VDDA= VDDto 3.6 V

Power-on/Power down reset (POR/PDR)

Low power modes: Sleep, Stop, Standby

Clock management

4 to 32 MHz crystal oscillator

32 kHz oscillator for RTC with calibration

Internal 8 MHz RC with x6 PLL option

Internal 40 kHz RC oscillator

Up to 51 fast I/Os

All mappable on external interrupt vectors

Up to 51 I/Os with 5V tolerant capability

5-channel DMA controller

One 12-bit, 1.0 μs ADC (up to 16 channels)

Conversion range: 0 to 3.6 V

Separate analog supply: 2.4 V to 3.6 V

Calendar RTC with alarm and periodic wakeup from Stop/Standby

11 timers

One 16-bit advanced-control timer for six-channel PWM output

Up to seven 16-bit timers, with up to four IC/OC, OCN, usable for IR control decoding

Independent and system watchdog timers

SysTick timer

Communication interfaces

Up to two I2C interfaces

Up to four USARTs supporting master synchronous SPI and modem control, one with auto baud rate detection

Up to two SPIs (18 Mbit/s) with 4 to 16 programmable bit frames

USB 2.0 full-speed interface with BCD and LPM support

Serial wire debug (SWD)

STMicroelectronics, 32bit ARM Cortex M0, STM32F0 Microcontroller, 48MHz, 128 kB Flash, 48-Pin LQFP

Liens connexes