Références fabricant

Microchip DSPIC33CK256MP505-I/M4, 16 bit dsPIC, dsPIC33CK Microcontroller, 100 MHz, 256kB FLASH, 48-Pin UQFN

N° de stock RS:: 187-1822
Référence fabricant:: DSPIC33CK256MP505-I/M4
Fabricant:: Microchip

Microchip DSPIC33CK256MP505-I/M4, 16 bit dsPIC, dsPIC33CK Microcontroller, 100 MHz, 256kB FLASH, 48-Pin UQFN

Actuellement indisponible

Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.

N° de stock RS:: 187-1822
Référence fabricant:: DSPIC33CK256MP505-I/M4
Fabricant:: Microchip

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Microchip
	Product Type	Microcontroller
	Series	dsPIC33CK
	Package Type	UQFN
	Mount Type	Surface
	Pin Count	48
	Device Core	dsPIC
	Data Bus Width	16bit
	Program Memory Size	256kB
	Interface Type	SPI, QEI
	DACs	3 x 12 Bit
	Maximum Clock Frequency	100MHz
	RAM Size	24kB
	Maximum Supply Voltage	3.6V
	Analogue Comparators	3
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	85°C
	Standards/Approvals	RoHS
	Width	6mm
	Height	550μm
	Length	6mm
	Minimum Supply Voltage	3V
	Number of Timers	1
	Program Memory Type	FLASH
	ADCs	19 x 12 Bit
	Instruction Set Architecture	DSP
	Automotive Standard	AEC-Q100

	Sélectionner tout
	Marque Microchip
	Product Type Microcontroller
	Series dsPIC33CK
	Package Type UQFN
	Mount Type Surface
	Pin Count 48
	Device Core dsPIC
	Data Bus Width 16bit
	Program Memory Size 256kB
	Interface Type SPI, QEI
	DACs 3 x 12 Bit
	Maximum Clock Frequency 100MHz
	RAM Size 24kB
	Maximum Supply Voltage 3.6V
	Analogue Comparators 3
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 85°C
	Standards/Approvals RoHS
	Width 6mm
	Height 550μm
	Length 6mm
	Minimum Supply Voltage 3V
	Number of Timers 1
	Program Memory Type FLASH
	ADCs 19 x 12 Bit
	Instruction Set Architecture DSP
	Automotive Standard AEC-Q100

Datasheet DSPIC33CK256MP505-I/M4

The Microchip dsPIC33CH256MP505 digital signal controllers (DSCs) feature dual 90 & 100 MIPS 16-bit dsPIC® DSC cores with integrated DSP and enhanced on-chip peripherals. It operates on 3V to 3.6V voltage range. It has 256Kbyte Program Memory, 48KB DSC enable the design of high-performance, precision motor control systems that are more energy efficient, quieter in operation and provide extended motor life. It can be used to control BLDC, PMSM, ACIM, SR and stepper motors. This DSC enable the design of switched mode power supplies such as AC/DC, DC/DC, UPS and PFC, providing high-precision digital control of Buck, Boost, Fly-Back, Half-Bridge, Full-Bridge, LLC and other power circuits to reach the highest possible energy efficiency.

Master Core 90 MIPS and Slave Core 100 MIPS Operation

Independent Peripherals for Master Core and Slave Core

High Speed PWMs with 250ps resolution, 12x2 Channel

Configurable Shared Resources for Master Core and Slave Core

Fast 6-Cycle Divide

Zero Overhead Looping

Multiple redundant clock sources

I/O Port read-back

Analog peripherals redundancies

Windowed Watchdog Timer

RAM BIST

Hardware traps

SFR locks

Write protection

Shadow working registers

Temperature range between -40°C to +85°C

Ultra Thin Plastic Quad Flat, No Lead – (48-pin) 6x6 mm body (UQFN) package

Liens connexes

Soyez le/la premier·ère à être informé de nos nouveautés produits et de nos offres spéciales.

adresse e-mail

Les données personnelles que vous nous fournissez en vous inscrivant à cette liste de diffusion seront traitées conformément à notre politique de confidentialité.