Microchip, 8 bit PIC, PIC18F8722 Microcontroller, 40 MHz, 128kB FLASH, 80-Pin TQFP

Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
N° de stock RS:
165-2227
Référence fabricant:
PIC18F8722-E/PT
Fabricant:
Microchip
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Microchip

Series

PIC18F8722

Product Type

Microcontroller

Package Type

TQFP

Mount Type

Surface

Pin Count

80

Device Core

PIC

Data Bus Width

8bit

Program Memory Size

128kB

Maximum Clock Frequency

40MHz

RAM Size

3.94kB

Maximum Supply Voltage

5.5V

Maximum Expanded Memory Size

128kB

Analogue Comparators

2

Minimum Operating Temperature

-40°C

Number of Programmable I/Os

22

Maximum Power Dissipation Pd

1W

Maximum Operating Temperature

125°C

Height

1.05mm

Standards/Approvals

RoHS

Length

12mm

Width

12 mm

Minimum Supply Voltage

2V

Number of Timers

4

ADCs

16 x 10 Bit

Program Memory Type

FLASH

Automotive Standard

No

Instruction Set Architecture

RISC

Pays d'origine :
TH

PIC18F8527/8622/8627/8722 8-Bit Microcontrollers


The PIC18F Microcontrollers from Microchip are the most capable 8-bit devices within Microchip’s offer. Available within the range is CAN, LIN and Ethernet capability as part of a comprehensive range of peripherals to meet the needs of embedded applications and versions featuring XLP (Extreme Low-Power) Technology for where power consumption is a key consideration.

The Microchip PIC18F8527/8622/8627/8722 family of Microcontrollers are 8-bit devices based upon Microchip’s PIC18 architecture and includes XLP (eXtreme Low Power) technology.

Microcontroller Features


C Compiler Optimized Architecture

Self-Programmable under Software Control

Priority Levels for Interrupts

8 x 8 Single-Cycle Hardware Multiplier

In-Circuit Serial Programming™ (ICSP™) via Two Pins

In-Circuit Debug (ICD) via Two Pins

Wide Operating Voltage Range: 2.0V to 5.5V

Programmable Brown-out Reset (BOR) with Software Enable Option

Extended Watchdog Timer (WDT)

Flexible Oscillator Structure

Power Management Features


Run: CPU On, Peripherals On

Idle: CPU Off, Peripherals On

Sleep: CPU Off, Peripherals Off

Ultra Low 50 nA Input Leakage

Run mode Currents Down to 25 μA Typical

Idle mode Currents Down to 6.8 μA Typical

Sleep mode Current Down to 120 nA Typical

Timer1 Oscillator: 900 nA, 32 kHz, 2V

Watchdog Timer: 1.6 μA, 2V Typical

Two-Speed Oscillator Start-up

Peripheral Features


High-Current Sink/Source 25 mA/25 mA

Three Programmable External Interrupts

Four Input Change Interrupts

Three Enhanced Capture/Compare/PWM (ECCP) modules

Two Capture/Compare/PWM (CCP) modules

Master Synchronous Serial Port (MSSP) module - supports 3-Wire SPI (all 4 modes) and I2C™

Enhanced Addressable USART module Block (no external crystal required)

10-Bit Analogue-to-Digital Converter – 12 or 16 channels depending on model

Dual Analogue Comparators with Input Multiplexing

Programmable 16-Level High/Low-Voltage Detection (HLVD) module