Microchip, 32 bit PIC, PIC32MX Microcontroller, 50 MHz, 3kB FLASH, 28-Pin SOIC

N° de stock RS:: 144-5913
Référence fabricant:: PIC32MX170F256B-50I/SO
Fabricant:: Microchip

Microchip, 32 bit PIC, PIC32MX Microcontroller, 50 MHz, 3kB FLASH, 28-Pin SOIC

Sous-total (1 tube de 27 unités)*

113,076 €

(TVA exclue)

136,809 €

(TVA incluse)

Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard

Unité	Prix par unité	le tube*
27 +	4,188 €	113,08 €

*Prix donné à titre indicatif

N° de stock RS:: 144-5913
Référence fabricant:: PIC32MX170F256B-50I/SO
Fabricant:: Microchip

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Microchip
	Series	PIC32MX
	Product Type	Microcontroller
	Package Type	SOIC
	Mount Type	Surface
	Pin Count	28
	Device Core	PIC
	Data Bus Width	32bit
	Program Memory Size	3kB
	Maximum Clock Frequency	50MHz
	RAM Size	64kB
	Maximum Supply Voltage	3.6V
	Minimum Operating Temperature	85°C
	Analogue Comparators	3
	Maximum Operating Temperature	-40°C
	Standards/Approvals	No
	Length	17.9mm
	Height	2.35mm
	Minimum Supply Voltage	2.3V
	Automotive Standard	AEC-Q100
	Instruction Set Architecture	MIPS32
	ADCs	10 x 10 Bit
	Program Memory Type	FLASH

	Sélectionner tout
	Marque Microchip
	Series PIC32MX
	Product Type Microcontroller
	Package Type SOIC
	Mount Type Surface
	Pin Count 28
	Device Core PIC
	Data Bus Width 32bit
	Program Memory Size 3kB
	Maximum Clock Frequency 50MHz
	RAM Size 64kB
	Maximum Supply Voltage 3.6V
	Minimum Operating Temperature 85°C
	Analogue Comparators 3
	Maximum Operating Temperature -40°C
	Standards/Approvals No
	Length 17.9mm
	Height 2.35mm
	Minimum Supply Voltage 2.3V
	Automotive Standard AEC-Q100
	Instruction Set Architecture MIPS32
	ADCs 10 x 10 Bit
	Program Memory Type FLASH

Pays d'origine :: TH

PIC32MX1x0/2x0/5x0 32-Bit Microcontrollers

The PIC32 range of microcontrollers from Microchip are 32-bit MCUs with a MIPS microAptiv or M4K core in combination with full range of integrated tools needed for embedded applications. The high performance offered by these devices is desirable for Advanced applications such as high impact graphic/user interfaces, Ethernet/USB/CAN connectivity, multitasking embedded control and high performance audio.

The PIC32Mx1x0/2x0/5x0 family of microcontrollers is based upon Microchip’s MIPS32® M4K® core providing up to 83 DMIPS, with variants offering up to 512 Kbytes Flash Program memory and RAM of up to 64 Kbytes.

Microcontroller Features

Up to 50 MHz Max. CPU Speed

MIPS16e® mode for up to 40% smaller code size

Multiple Power Management Modes

Configurable Watchdog Timer (WDT)

In-Circuit Serial Programming (ICSP)

In-Circuit Debug (ICD)

Peripheral Features

Peripheral Pin Select (PPS)

10-bit 1 Msps Analogue to Digital Converter (ADC) Module – 9 to 48 Channels Dependent on Model

Analogue Comparators – 2 to 3 Dependent on Model

Five 16-bit Timers

Two 32-bit Timers

Real-Time Clock and Calendar (RTCC) Module

Five Output Compare (OC) and Five Input Compare (IC) Modules

Four Direct Memory Access (DMA) Channels

Audio/Graphics/Touch HMI Features

Data Communication – I2S, LJ, RJ, and DSP modes

Control Interface – SPI and I2C

Master Clock – For generation of Fractional Clock frequencies. Can be synchronised with USB Clock and can be tuned in Run-Time

Charge Time Measurement Unit (CTMU) – Available on Some Models

Communication Interface Features

USB 2.0-compliant Full-Speed On-The-Go (OTG) Controller – Dependant on Model

Two UART Modules – Supports LIN 2.0 protocols and IrDA®

Two 4-Wire SPI Modules

Two I2C Modules with SMBus Support

Parallel Master Port (PMP)

High-performance 32-bit microcontrollers designed for: High Impact Graphics/User Interfaces, Ethernet/USB/CAN Connectivity, Multitasking Embedded Control, High Performance Audio