Microchip, 32 bit ARM Cortex M3, Atmega Microcontroller, 20 MHz, 256kB FLASH, 64-Pin LQFP
- N° de stock RS:
- 131-0384P
- Référence fabricant:
- ATSAM3S4BA-AU
- Fabricant:
- Microchip
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 131-0384P
- Référence fabricant:
- ATSAM3S4BA-AU
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Series | Atmega | |
| Product Type | Microcontroller | |
| Package Type | LQFP | |
| Mount Type | Surface, Through Hole | |
| Pin Count | 64 | |
| Device Core | ARM Cortex M3 | |
| Data Bus Width | 32bit | |
| Program Memory Size | 256kB | |
| Interface Type | USART, SPI, 2 Wire I2C | |
| Maximum Clock Frequency | 20MHz | |
| RAM Size | 48kB | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Width | 10mm | |
| Standards/Approvals | RoHS | |
| Height | 1.45mm | |
| Length | 10mm | |
| Analogue Comparators | 1 | |
| Number of Programmable I/Os | 23 | |
| DACs | 2 x 12 Bit | |
| Minimum Supply Voltage | 1.8V | |
| Instruction Set Architecture | RISC | |
| Automotive Standard | No | |
| Program Memory Type | FLASH | |
| ADCs | 10 x 12 Bit | |
| Number of Timers | 1 | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Series Atmega | ||
Product Type Microcontroller | ||
Package Type LQFP | ||
Mount Type Surface, Through Hole | ||
Pin Count 64 | ||
Device Core ARM Cortex M3 | ||
Data Bus Width 32bit | ||
Program Memory Size 256kB | ||
Interface Type USART, SPI, 2 Wire I2C | ||
Maximum Clock Frequency 20MHz | ||
RAM Size 48kB | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Width 10mm | ||
Standards/Approvals RoHS | ||
Height 1.45mm | ||
Length 10mm | ||
Analogue Comparators 1 | ||
Number of Programmable I/Os 23 | ||
DACs 2 x 12 Bit | ||
Minimum Supply Voltage 1.8V | ||
Instruction Set Architecture RISC | ||
Automotive Standard No | ||
Program Memory Type FLASH | ||
ADCs 10 x 12 Bit | ||
Number of Timers 1 | ||
SMART SAM3S ARM® Cortex-M3 Microcontrollers
Based on the ARM® Cortex®-M3 core, the Atmel® SMART SAM3S Flash microcontroller (MCU) integrates features to simplify system design and reduce power consumption down to 2.3mW at 1MHz, 1.45mW/MHz at 64MHz operation and 1.6μA in backup mode with the Real-Time-Clock running. The series also includes parallel capture mode, and QTouch capacitive touch support.
Liens connexes
- Coral G950-06809-01 for use with Raspberry Pi
- Siemens SIMATIC S7-1200 Series PLC CPU for Use with SIMATIC S7-1200 Series Transistor Output 2
- Carling Technologies Illuminated DPDT, On-(On) Rocker Switch Panel Mount
- SICK Encoder Collets for Use with DBS36E-BBxxxx
- Littelfuse Through Hole Gas Discharge Tube
- Igus GFM-0607-08 6mm Bore Plain Bearing, 7mm O.D
- Raspberry Pi QWERTY (Spain) Raspberry Pi Keyboard
- Coral Google Mini PCIe M.2 Accelerator B/M Development Kit G650-04686-01