Microchip ATMEGA328P-MN, 8 bit AVR, megaAVR Microcontroller, 20 MHz, 32kB FLASH, 32-Pin QFN

Sous-total (1 paquet de 2 unités)*

6,70 €

(TVA exclue)

8,10 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
Temporairement en rupture de stock
  • 1 458 unité(s) expédiée(s) à partir du 22 décembre 2025
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
le paquet*
2 +3,35 €6,70 €

*Prix donné à titre indicatif

N° de stock RS:
131-0273
Référence fabricant:
ATMEGA328P-MN
Fabricant:
Microchip
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Microchip

Series

megaAVR

Product Type

Microcontroller

Package Type

QFN

Mount Type

Surface

Pin Count

32

Device Core

AVR

Data Bus Width

8bit

Program Memory Size

32kB

Interface Type

SPI, USART

Maximum Clock Frequency

20MHz

RAM Size

2kB

Maximum Supply Voltage

5.5V

Minimum Operating Temperature

-40°C

Analogue Comparators

1

Number of Programmable I/Os

23

Maximum Operating Temperature

85°C

Width

5.1 mm

Length

5.1mm

Height

0.95mm

Standards/Approvals

RoHS

Minimum Supply Voltage

1.8V

Program Memory Type

FLASH

Instruction Set Architecture

RISC

Automotive Standard

No

ADCs

8 x 10 Bit

Number of Timers

2

ATmega328P 8-Bit megaAVR picoPower Microcontrollers


The Atmel ATmega328P Microcontroller is an 8-bit megaAVR device based on the AVR enhanced RISC architecture. Featured is picoPower technology that offers ultra-low power consumption and low-power sleep modes, ideal for battery powered applications.

Microcontroller Features


•20 MHz Max. Operating Frequency

•Up to 20 MIPS at 20 MHz

•32 KB Flash

•1024 B EEPROM

•2 KB SRAM

•131 Instructions – Most single clock cycle execution

•32 General Purpose Registers

•23 GPIO

•Power-on Reset and Programmable Brown-out Detection

•Internal Calibrated Oscillator

•External and Internal Interrupt Sources

•Six Power-Saving Sleep Modes

•Internal and External Interrupts

•Fully Static Operation

Peripheral Features


•10-bit 15 ksps Analogue-to-Digital Converter (ADC) – 8 or 6 channels

•Capacitive Touch Sense – 16 channels

•Temperature Sensor

•Two 8-bit Timers

•One 16-bit Timer

•Output Compare Module – 6 channels

•Six PWM Channels

•Programmable Serial USART

•Master/Slave SPI Serial Interface

•Byte-oriented 2-wire Serial Interface – I2C compatible

•Programmable Watchdog Timer with Separate Oscillator

•Analogue Comparator

•Interrupt and Wake-up on Pin Change