STMicroelectronics, 32 bit ARM Cortex M0+, STM32U073x8/B/C Microcontroller, 56 MHz, 256kB FLASH, 32-Pin UFQFPN

Sous-total 1 unité (conditionné en bande continue)*

1,70 €

(TVA exclue)

2,06 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 2 980 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +1,70 €

*Prix donné à titre indicatif

Options de conditionnement :
N° de stock RS:
330-396P
Référence fabricant:
STM32U073KCU6TR
Fabricant:
STMicroelectronics
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

STMicroelectronics

Product Type

Microcontroller

Series

STM32U073x8/B/C

Package Type

UFQFPN

Mount Type

Surface

Pin Count

32

Device Core

ARM Cortex M0+

Data Bus Width

32bit

Program Memory Size

256kB

Maximum Clock Frequency

56MHz

RAM Size

40kB

Maximum Supply Voltage

3.6V

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

125°C

Height

7mm

Width

5 mm

Standards/Approvals

NIST SP 800-90B (TRNG), PSA Level 1, SESIP Level 3

Number of Programmable I/Os

69

Length

9mm

DACs

1 x 12 Bit

Analogue Comparators

2

Minimum Supply Voltage

1.71V

ADCs

1 x 12 Bit

Automotive Standard

No

Instruction Set Architecture

Arm Cortex

Program Memory Type

FLASH

Number of Timers

10

Pays d'origine :
CN
The STMicroelectronics devices are ultra-low-power microcontrollers based on the high-performance Arm Cortex-M0+ 32-bit RISC core operating at a frequency of up to 56 MHz The devices embed high-speed memories (up to 256-Kbyte flash memory and 40-Kbyte SRAM with hardware parity check), and an extensive range of enhanced I/Os and peripherals connected to APB and AHB buses, and a 32-bit multi-AHB bus matrix. They also embed protection mechanisms for embedded flash memory and SRAM, such as readout protection and write protection. The devices offer a 12-bit ADC, a 12-bit DAC, two embedded rail-to-rail analog comparators, one operational amplifier, a low-power RTC, one general-purpose 32-bit timer, one 16-bit PWM timer dedicated to motor control, three general-purpose 16-bit timers, and three 16-bit low-power timers.

1.71 V to 3.6 V power supply

Shutdown mode 6 wake up pins 16 nA

Standby mode 6 wake up pins 160 nA with RTC 30 nA without RTC

Stop 2 mode 825 nA with RTC 695 nA without RTC

Run mode LDO mode 52 uA/MHz

Batch acquisition mode BAM

4 us wake up from Stop mode

Brownout reset BOR