ADAFRUIT INDUSTRIES Feather M0 Bluefruit LE MCU Development Board 2995

Voir la catégorie

Sous-total (1 unité)*

28,12 €

(TVA exclue)

34,03 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • Plus 8 unité(s) expédiée(s) à partir du 16 février 2026
  • Plus 20 unité(s) expédiée(s) à partir du 25 février 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +28,12 €

*Prix donné à titre indicatif

N° de stock RS:
124-5516
Numéro d'article Distrelec:
300-91-208
Référence fabricant:
2995
Fabricant:
ADAFRUIT INDUSTRIES
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

ADAFRUIT INDUSTRIES

Product Type

Development Board

Kit Classification

Development Board

Kit Name

Feather M0 Bluefruit LE

Technology

MCU

Processor Family Name

SAM

Processor Part Number

ATSAMD21G18

Processor Type

Microcontroller

Standards/Approvals

RoHS

Pays d'origine :
US

ADAFRUIT INDUSTRIES MCU Development Board


The ADAFRUIT INDUSTRIES MCU development board has all the basic features shared by all the Feather M0 range boards with a built-in Bluetooth low energy module (BLE). It uses the Bluefruit LE module and has two status indicator LEDs. It has an nRF51822 chipset from Nordic Semiconductor, programmed with multi-function code that opens up a huge range of options. There is a built-in battery charging circuit that enables you to measure and monitor battery levels. It has a standard UART receive/transmit profile and AT command set to have full control over your device. This chip also has a built-in USB port with USB-to-serial programming and debug capability so no need for an FTDI-like chip. The development board is especially designed for low power portable projects.

Features and Benefits


256KB flash and 32KB RAM (No EEPROM)

32.768kHz crystal for clock generation and RTC

3.3V regulator with 500mA peak current output

USB native support, comes with USB bootloader and serial port debugging

20 GPIO pins

Dedicated connector for 3.7 V lithium batteries

Communication protocols like hardware serial, hardware I²C and hardware SPI support

PWM outputs on all pins

6 x 12-bit analogue inputs

1 x 10-bit analogue output (DAC)

Built-in 100mA LiPo charger with charging status indicator LED

Pin #13 red LED for general purpose blinking

Power/ enable pin

4 mounting holes

Reset button

Applications


Embedded development

Educational institutions

Robotics

Internet of things

Human machine interface

Electronics laboratories

Automation

Certifications


ANSI/ESD S20.20:2014

BS EN 61340-5-1:2007

Liens connexes