Références fabricant

Honeywell Roller Lever Micro Switch, Quick Connect Terminal, 10 A, 125 V ac, SPCO

N° de stock RS:: 820-7482
Référence fabricant:: V7-1B17D8-263
Fabricant:: Honeywell

Honeywell Roller Lever Micro Switch, Quick Connect Terminal, 10 A, 125 V ac, SPCO

Sous-total (1 unité)*

6,90 €

(TVA exclue)

8,35 €

(TVA incluse)

Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard

Unité	Prix par unité
1 +	6,90 €

*Prix donné à titre indicatif

N° de stock RS:: 820-7482
Référence fabricant:: V7-1B17D8-263
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Actuator Type	Roller Lever
	Product Type	Micro Switch
	Terminal Type	Quick Connect
	Switch Contact Current	10 A
	Contact Configuration	SPCO
	Housing Material	Polycarbonate
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	82°C
	Microswitch Type	Miniature
	Contact AC Voltage	125V ac
	Series	V7
	Standards/Approvals	RoHS, CSA, ENEC, UL
	Hazardous Area Certification	No
	Depth	18.2mm
	Length	28.8mm
	Width	10.2 mm

	Sélectionner tout
	Marque Honeywell
	Actuator Type Roller Lever
	Product Type Micro Switch
	Terminal Type Quick Connect
	Switch Contact Current 10 A
	Contact Configuration SPCO
	Housing Material Polycarbonate
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 82°C
	Microswitch Type Miniature
	Contact AC Voltage 125V ac
	Series V7
	Standards/Approvals RoHS, CSA, ENEC, UL
	Hazardous Area Certification No
	Depth 18.2mm
	Length 28.8mm
	Width 10.2 mm

Pays d'origine :: MX

Honeywell Series V7 Micro Switch, 10A Contact Current, 125V Contact AC Voltage - V7-1B17D8-263

This micro switch provides a compact, actuator-driven electrical switching solution for automation and control systems. Designed for environments requiring a small footprint and a roller lever actuator, it offers a straightforward single-pole changeover contact arrangement for switching AC loads in industrial and appliance contexts.

Features and Benefits:

• Rated for 10A current to handle moderate load switching requirements
• 125V AC contact rating for compatibility with common supply voltages
• Quick-connect terminals for efficient panel or harness installation
• Polycarbonate enclosure delivering electrical insulation and chemical resistance
• Operational range from -40 to 82 °C to suit varied ambient conditions

Applications

• Suitable for detecting mechanical end positions in conveyor systems
• Ideal for use as a limit input in industrial automation equipment
• Used with domestic and commercial appliances requiring lever actuation
• Can be used for safety interlock sensing on access panels

How is the switch mounted or connected in a control circuit?

The device uses flat quick-connect terminals allowing fast attachment to spade connectors or wiring harnesses without soldering.

What actuation style should be expected during installation?

It employs a roller lever actuator that converts linear or angular motion into a reliable switching action for mechanical interfaces.

Which approvals and standards are relevant when specifying this component?

It carries recognised approvals covering international safety and performance requirements suitable for many regulated applications.

What Terminal current capability should be considered for contact selection?

Contacts are specified to conduct currents up to 10 A, so downstream wiring and protection should match that capacity.

Standards

CSA, ENEC & UL