Schneider Electric, PowerPact, PowerPact Molded Case Circuit Breaker 2-Pole 100A, Breaking Capacity 65 kA, Screw, DIN
- N° de stock RS:
- 428-848
- Référence fabricant:
- BJF26100
- Fabricant:
- Schneider Electric
Sous-total (1 unité)*
514,90 €
(TVA exclue)
623,03 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stocké-e par le fabricant
- Prêt à être expédié à partir du 06 janvier 2027
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 514,90 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 428-848
- Référence fabricant:
- BJF26100
- Fabricant:
- Schneider Electric
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Schneider Electric | |
| Range | PowerPact | |
| Product Type | Molded Case Circuit Breaker | |
| Series | PowerPact | |
| Number of Poles | 2 | |
| Current Rating | 100A | |
| Breaking Capacity | 65kA | |
| Mount Type | Screw, DIN Rail | |
| Rated AC Voltage | 690V ac | |
| Terminal Type | Nut | |
| Width | 54mm | |
| Depth | 80mm | |
| Height | 137mm | |
| Standards/Approvals | EN, IEC 6094751, IEC 60947 UL 489 GB 14048. CSA C. 5EN | |
| Reset Actuator Type | Toggle | |
| Tripping Mechanism | Acetic Acid | |
| Sélectionner tout | ||
|---|---|---|
Marque Schneider Electric | ||
Range PowerPact | ||
Product Type Molded Case Circuit Breaker | ||
Series PowerPact | ||
Number of Poles 2 | ||
Current Rating 100A | ||
Breaking Capacity 65kA | ||
Mount Type Screw, DIN Rail | ||
Rated AC Voltage 690V ac | ||
Terminal Type Nut | ||
Width 54mm | ||
Depth 80mm | ||
Height 137mm | ||
Standards/Approvals EN, IEC 6094751, IEC 60947 UL 489 GB 14048. CSA C. 5EN | ||
Reset Actuator Type Toggle | ||
Tripping Mechanism Acetic Acid | ||
- Pays d'origine :
- MX
The Schneider Electric Circuit Breaker offers thermal magnetic protection, ensuring reliable circuit safeguarding. It is equipped with dual-break rotating contacts that minimize peak current during a short-circuit fault. It comes come with an integral push-to-trip button in the cover for manual tripping. The unit mount construction allows for flexible installation with traditional back pan mounting using screws or integrated DIN rail mounting.
Unit has terminal nuts on both termination ends
Front cover confirms to IP40
Mechanical durability 15000 cycles conforming to IEC 947 1
Electrical durability 10000 cycles conforming to IEC 947 1
Liens connexes
- Schneider Electric PowerPacT Molded Case Circuit Breaker 3-Pole 100A Screw
- Schneider Electric PowerPact Molded Case Circuit Breaker 3-Pole 100A Clip-on
- Schneider Electric PowerPact Molded Case Circuit Breaker 1-Pole 100A Clip-on
- Schneider Electric PowerPact Molded Case Circuit Breaker 4-Pole 100A Clip-on
- Schneider Electric PowerPacT Molded Case Circuit Breaker 3-Pole 100A Fixed
- Schneider Electric PowerPact Molded Case Circuit Breaker 2-Pole 35A Screw, DIN
- Schneider Electric PowerPact Molded Case Circuit Breaker 1-Pole 40A Screw, DIN
- Schneider Electric PowerPact Molded Case Circuit Breaker 2-Pole 25A Screw, DIN