Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	ABB
	Product Type	Miniature Circuit Breaker
	Number of Poles	2
	Current Rating	10A
	Tripping Characteristics	Type K
	Rated AC Voltage	240V
	Breaking Capacity	10kA
	Range	SMISSLINE TP
	Series	S400M
	Terminal Type	Screw
	IP Rating	IP20
	Standards/Approvals	IEC/EN 60947-2
	Height	91mm
	Width	36mm
	Depth	75mm
	Tripping Mechanism	Electromechanic, Thermal
	Reset Actuator Type	I/O Actuator

	Sélectionner tout
	Marque ABB
	Product Type Miniature Circuit Breaker
	Number of Poles 2
	Current Rating 10A
	Tripping Characteristics Type K
	Rated AC Voltage 240V
	Breaking Capacity 10kA
	Range SMISSLINE TP
	Series S400M
	Terminal Type Screw
	IP Rating IP20
	Standards/Approvals IEC/EN 60947-2
	Height 91mm
	Width 36mm
	Depth 75mm
	Tripping Mechanism Electromechanic, Thermal
	Reset Actuator Type I/O Actuator

Datasheet - 2CCS572001R0427

Pays d'origine :: CH

ABB S400M Series Miniature Circuit Breaker, 10A Current, 240V Rated AC Voltage - 2CCS572001R0427

This miniature circuit breaker provides overcurrent protection for low-voltage installations, combining thermal and electromechanical trip actions to interrupt fault currents. Designed for panel or distribution board use, it conforms to recognised switching device standards and is intended for environments where Compact protective devices are required.

Features and Benefits:

• 10A rating delivers controlled protection for light circuits
• 10kA breaking capacity limits fault energy during short circuits
• Type K tripping provides defined selective response to inrushes
• Screw terminals enable secure conductor clamping under vibration
• Reset I/O actuator allows clear manual on/off operation

Applications

• Suitable for protecting lighting circuits in commercial premises
• Ideal for motor feeder protection with moderate inrush currents
• Used with dual-pole isolation requirements in distribution boards
• Can be used for control circuits requiring manual reset action

What tripping mechanisms are combined to detect faults?

It employs a thermal element for overloads and an electromechanical release for short-circuit disconnection.

Which enclosure ingress level applies to panel use?

The protection rating corresponds to IP20, suitable for installation inside enclosures or distribution panels.

How is pole configuration arranged for load interruption?

Two poles are provided to simultaneously switch both conductors in single-phase systems.

What physical footprint considerations affect mounting density?

The unit is designed with a 36mm width to enable Compact arrangement on standard mounting rails.

ABB SMISSLINE TP S400M Miniature Circuit Breaker, 2-Pole, 10A, Type K, 240V AC, 10 kA Breaking Capacity

Frais de livraison offerts pour toute commande de plus de 90,00 €