Vero Technologies 1 Matrix Board FR4 1.02 mm Holes, 2.54 mm Pitch, 454.6 mm 179mm
- N° de stock RS:
- 159-6394
- Référence fabricant:
- 08-40055
- Fabricant:
- Vero Technologies
Offre groupée disponible
Sous-total (1 unité)*
52,65 €
(TVA exclue)
63,71 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 7 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 52,65 € |
| 5 - 9 | 50,02 € |
| 10 - 49 | 47,39 € |
| 50 + | 44,75 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 159-6394
- Référence fabricant:
- 08-40055
- Fabricant:
- Vero Technologies
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Vero Technologies | |
| Product Type | Matrix Board | |
| Number of Sides | 1 | |
| Hole Pitch | 2.54mm | |
| Length | 454.6mm | |
| Width | 179mm | |
| Board Thickness | 1.6mm | |
| Board Material | Glass Reinforced Polyester | |
| Hole Diameter | 1.02mm | |
| FR Material Grade | FR4 | |
| Copper Thickness | 35μm | |
| Standards/Approvals | DIN 41494 (KM6-II) | |
| Sélectionner tout | ||
|---|---|---|
Marque Vero Technologies | ||
Product Type Matrix Board | ||
Number of Sides 1 | ||
Hole Pitch 2.54mm | ||
Length 454.6mm | ||
Width 179mm | ||
Board Thickness 1.6mm | ||
Board Material Glass Reinforced Polyester | ||
Hole Diameter 1.02mm | ||
FR Material Grade FR4 | ||
Copper Thickness 35μm | ||
Standards/Approvals DIN 41494 (KM6-II) | ||
Square pad cards
Single-sided boards for wiring by wrapping, with optimum flexibility and maximum density.
The DIP sockets are held in place by soldering the outer pins to the corresponding square pads.
Reference grid on both sides of the board, facilitating wiring and component mounting.
Stock number 159-6394 is a die set of 60 x 179 holes with a pitch of 2.54 mm, designed for prototyping of any dimensions.
DIN Type Matrixboard
Matrix boards with 1mm holes on a 2.50mm pitch.
Liens connexes
- Vero Technologies FR4 1.02 mm Holes, 2.54 mm Pitch
- Vero Technologies 10-27563 DIN 41612 FR4 1.02 mm Holes, 2.54 mm Pitch
- Vero Technologies Matrix Board FR4 With 42 x 38 1.02 mm Holes 160 mm 100 mm
- Vero Technologies FR4 1 mm Holes, 2.54 mm Pitch
- Vero Technologies 1 Matrix Board FR4 With 75 x 86 1.02 mm Holes, 233.4 mm 220 mm
- Vero Technologies 1 Matrix Board FR4 With 52 x 85 1.02 mm Holes, 233.4 mm 160 mm
- Vero Technologies 1 Matrix Board FR4 With 54 x 34 1.02 mm Holes, 160 mm 100 mm
- Vero Technologies 10-0145 FR4