Texas Instruments SN65LVDS179D, LVDS Transceiver LVDM, LVTTL Driver, Receiver, 8-Pin SOIC

Offre groupée disponible

Sous-total (1 unité)*

4,84 €

(TVA exclue)

5,86 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
Dernier stock RS
  • Plus 59 unité(s) expédiée(s) à partir du 05 janvier 2026
  • 4 unité(s) finale(s) expédiée(s) à partir du 12 janvier 2026
Unité
Prix par unité
1 - 44,84 €
5 - 94,60 €
10 - 244,14 €
25 - 493,73 €
50 +3,54 €

*Prix donné à titre indicatif

Options de conditionnement :
N° de stock RS:
462-2389
Référence fabricant:
SN65LVDS179D
Fabricant:
Texas Instruments
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Texas Instruments

Number of Drivers

1

Input Type

LVDM, LVTTL

Output Type

Driver, Receiver

IC Type

Transceiver IC

Transmission Data Rate

400Mbps

Number of Elements per Chip

1

Mounting Type

Surface Mount

Package Type

SOIC

Pin Count

8

Dimensions

4.9 x 3.91 x 1.58mm

Height

1.58mm

Length

4.9mm

Maximum Operating Supply Voltage

3.6 V

Width

3.91mm

Minimum Operating Supply Voltage

3 V

Minimum Operating Temperature

-40 °C

Maximum Operating Temperature

+85 °C

LVDS Transceivers, Texas Instruments


The Texas Instruments SN65LVDS179 devices are differential line drivers and receivers that use low-voltage differential signalling (LVDS) to achieve signalling rates as high as 400 Mbps. The TIA/EIA-644 standard-compliant electrical interface provides a minimum differential output voltage magnitude of 247 mV into a 100-Ω load and receipt of 100-mV signals with up to 1 V of ground potential difference between a transmitter and receiver.

Meets or Exceeds the Requirements of ANSI
TIA/EIA-644-1995 Standard
Full-Duplex Signalling Rates up to 150 Mbps
Bus-Pin ESD Exceeds 12 kV
Operates From a Single 3.3-V Supply
Low-Voltage Differential Signalling With Typical
Output Voltages of 350 mV and a 100-Ω Load
Propagation Delay Times
Driver: 1.7 ns Typical
Receiver: 3.7 ns Typical
Power Dissipation at 200 MHz
Driver: 25 mW Typical
Receiver: 60 mW Typical
LVTTL Input Levels Are 5-V Tolerant
Receiver Maintains High Input Impedance With
VCC < 1.5 V
Receiver Has Open-Circuit Fail Safe


LVDS Communication


Low Voltage Differential Signaling, or LVDS, is an electrical signaling system that can run at very high speeds over cheap, twisted-pair copper cables.


Applications: Firewire, SATA, SCSI

Liens connexes