Brady Red 1-Lock Glass-Reinforced Nylon Pneumatic Hose Lockouts, 7.87mm Shackle, 12mm Attachment
- N° de stock RS:
- 305-9229
- Référence fabricant:
- ASSY, PNEUMATIC QUICK DISC. L/O 1 PACK
- Fabricant:
- Brady
Sous-total (1 unité)*
18,88 €
(TVA exclue)
22,84 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 31 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 18,88 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 305-9229
- Référence fabricant:
- ASSY, PNEUMATIC QUICK DISC. L/O 1 PACK
- Fabricant:
- Brady
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Brady | |
| Type | Pneumatic Hose Lockouts | |
| Colour | Red | |
| Number of Locks | 1 | |
| Material | Glass-Reinforced Nylon | |
| Attachment Point Minimum Size | 6mm | |
| Attachment Point Maximum Size | 12mm | |
| Lock Shackle Maximum Diameter | 7.87mm | |
| Risk Type | Mechanical Risk | |
| Sélectionner tout | ||
|---|---|---|
Marque Brady | ||
Type Pneumatic Hose Lockouts | ||
Colour Red | ||
Number of Locks 1 | ||
Material Glass-Reinforced Nylon | ||
Attachment Point Minimum Size 6mm | ||
Attachment Point Maximum Size 12mm | ||
Lock Shackle Maximum Diameter 7.87mm | ||
Risk Type Mechanical Risk | ||
Statut RoHS : Exempté
- Pays d'origine :
- BE
Pneumatic lockout
The pneumatic lockout is used to isolate pneumatic energy sources without the expense and inconvenience of fitting a lock valve.
It fits straight onto the connector through which any installation is connected to its source of compressed air. Can be used on most connectors of 63.5 mm, 95.2 mm or 125 mm.
The centre hole in the lockout device can be used to permanently secure the air hose. The side loops can be used to hook the end of the hose onto the lockout device.
Must be used with a padlock with a shackle diameter of 63.5 or 71.4 mm.
It fits straight onto the connector through which any installation is connected to its source of compressed air. Can be used on most connectors of 63.5 mm, 95.2 mm or 125 mm.
The centre hole in the lockout device can be used to permanently secure the air hose. The side loops can be used to hook the end of the hose onto the lockout device.
Must be used with a padlock with a shackle diameter of 63.5 or 71.4 mm.
Liens connexes
- Brady Red 1-Lock Glass-Filled Nylon Cable Lockout Devices, 7.87mm Shackle
- Brady Yellow 1-Lock Glass-Filled Nylon Cable Lockout Devices, 7.87mm Shackle
- Brady Blue 1-Lock Glass-Filled Nylon Cable Lockout Devices, 7.87mm Shackle
- Brady Red 1-Lock Polypropylene Cylinder Valve Lockouts 36mm Attachment
- Brady Red 2-Lock ABS Electrical Plug Lockouts, 7.87mm Shackle
- Brady Red 4-Lock Polystyrene Electrical Plug Lockouts, 7.87mm Shackle
- Brady Red 6-Lock Glass-Filled Nylon Cable Lockout Devices, 7.87mm Shackle
- Brady Yellow 6-Lock Steel Lockout Hasp 38mm Attachment
