Lenze ETP CLASSIC 45MM, 77mm ID, 45 mm OD Locking Bush, 75 mm, Steel, 1290 Nm
- N° de stock RS:
- 477-6767
- Référence fabricant:
- ETP CLASSIC 45MM
- Fabricant:
- Lenze
Visuel non contractuel
Sous-total (1 unité)*
527,35 €
(TVA exclue)
638,09 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stocké-e par le fabricant
- Prêt à être expédié à partir du 28 décembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 527,35 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 477-6767
- Référence fabricant:
- ETP CLASSIC 45MM
- Fabricant:
- Lenze
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Lenze | |
| Torque Rating | 1290Nm | |
| Product Type | Locking Bush | |
| Bore Diameter | 77mm | |
| Length | 75mm | |
| Material | Steel | |
| Series | ETP CLASSIC | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Lenze | ||
Torque Rating 1290Nm | ||
Product Type Locking Bush | ||
Bore Diameter 77mm | ||
Length 75mm | ||
Material Steel | ||
Series ETP CLASSIC | ||
Standards/Approvals No | ||
Statut RoHS : Exempté
ETP Classic Locking Bushes
Unique hydraulic shaft to hub locking bush offering infinite radial and axial adjustment. Designed for frequent operations for very accurate mounting of gears, pulleys, sprockets etc.
High concentricity and self-centering
Fast, easy locking and un-locking with few pressure screws
Automatic release when screws are loosened
Ideal for applications with smaller diameter hubs
H7-h7 hub bore and shaft tolerances
Radial concentricity 0.04mm
Temperature range -30 to +85°C, refer to technical dept. if ambient temperature is below 0°C
Caution
To select the correct bush and hub the external diameter of the outer hub should be sufficient to withstand the stresses exerted. To calculate the size, multiply the bush outside diameter by the relevant factor: Steel x 1.7, Cast Iron x 2.2, Aluminium x 2.7. If the selected hub diameter is greater than or equal to the calculated size, then the selected size is suitable.
Liens connexes
- Lenze ETP EXPRESS 45MM 45 mm OD Locking Bush Steel, 1400 Nm
- Lenze ETP CLASSIC 50MM 50 mm OD Locking Bush Steel, 1900 Nm
- Lenze ETP CLASSIC 25MM 25 mm OD Locking Bush Steel, 250 Nm
- Lenze ETP CLASSIC 35MM 35 mm OD Locking Bush Steel, 650 Nm
- Lenze ETP CLASSIC 30MM 30 mm OD Locking Bush Steel, 420 Nm
- Lenze ETP CLASSIC 40MM 40 mm OD Locking Bush Steel, 940 Nm
- Lenze ETP CLASSIC 15MM 15 mm OD Locking Bush Steel, 55 Nm
- Lenze ETP CLASSIC 24MM 24 mm OD Locking Bush Steel, 200 Nm
