SKF PHF FX51-25X50, 25mm ID, 50 mm OD Coupler, 34 mm, 420 Nm
- N° de stock RS:
- 268-9926
- Référence fabricant:
- PHF FX51-25X50
- Fabricant:
- SKF
Sous-total (1 unité)*
16,15 €
(TVA exclue)
19,54 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stocké-e par le fabricant
- Prêt à être expédié à partir du 25 mars 2027
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 16,15 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 268-9926
- Référence fabricant:
- PHF FX51-25X50
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Coupler | |
| Torque Rating | 420Nm | |
| Bore Diameter | 25mm | |
| Length | 34mm | |
| Series | FX51 | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Coupler | ||
Torque Rating 420Nm | ||
Bore Diameter 25mm | ||
Length 34mm | ||
Series FX51 | ||
Standards/Approvals No | ||
- Pays d'origine :
- CN
The SKF bushing and hub is available in many variant, offering specific benefit in power transmission application ranging from automotive to papermaking. This bushing is designed to attach component to shaft using a 360-degree interference fit, with no keyway required, the shaft size can usually be reduced and only minimal machining is required. Installation is as simple as sliding the bushing into place and tightening it with the clamp screw.
Manufactured according to established market standard
Available in a wide range of metric and imperial bore size
Easily installed and removed using basic tool
True zero backlash
Reduced machining and material cost
Liens connexes
- SKF PHF FX51-30X55 55 mm OD Coupler 500 Nm
- SKF PHF FX40-25X50 50 mm OD Coupler 680 Nm
- SKF PHF FX10-25X50 50 mm OD Coupler 380 Nm
- SKF PHF FX41-30X55 55 mm OD Coupler 660 Nm
- SKF PHF FX41-40X65 65 mm OD Coupler 1210 Nm
- Ringfeder 7012 - 25x50 50 mm OD Locking Assembly, 27.5 mm
- SKF PHF FX10-110X155 155 mm OD Coupler 10500 Nm
- SKF PHF FX10-100X145 145 mm OD Coupler 9600 Nm
