Ewellix Makers in Motion LBHT 25 A-2LS Bearing with 25 mm ID 40 mm OD 4900 N 5100 N
- N° de stock RS:
- 423-2346
- Référence fabricant:
- LBHT 25 A-2LS
- Fabricant:
- Ewellix Makers in Motion
Sous-total (1 unité)*
164,65 €
(TVA exclue)
199,23 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 3 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 164,65 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 423-2346
- Référence fabricant:
- LBHT 25 A-2LS
- Fabricant:
- Ewellix Makers in Motion
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Ewellix Makers in Motion | |
| Product Type | Bearing | |
| Outside Diameter | 40 mm | |
| Length | 58mm | |
| Inside Diameter | 25 mm | |
| End Type | Sealed | |
| Dynamic Load Rating | 4900N | |
| Base to Bore Centerline | 20mm | |
| Closure Type | Open | |
| Static Load Rating | 5100N | |
| Material | Steel | |
| Series | LBHT | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Ewellix Makers in Motion | ||
Product Type Bearing | ||
Outside Diameter 40 mm | ||
Length 58mm | ||
Inside Diameter 25 mm | ||
End Type Sealed | ||
Dynamic Load Rating 4900N | ||
Base to Bore Centerline 20mm | ||
Closure Type Open | ||
Static Load Rating 5100N | ||
Material Steel | ||
Series LBHT | ||
Standards/Approvals No | ||
Statut RoHS : Exempté
- Pays d'origine :
- DE
LBCT/LBHT Ball Bushings - Open
Radial and axial lip seals protect against bearing contamination
High dynamic and static load-carrying capacity
Dimensions series 3 of ISO10285
Increased shaft support
Must be located in axial direction
SKF Linear Ball Bushings & Sets
Closed ball bushings and plain bearings for XY positioning, pick and place applications and precision linear motion systems.,Plain bearings to be used in heavy shock, vibration, high acceleration or high speed situations which are unsuitable for linear ball bearings.,Note that higher frictional forces must be expected with linear plain bearings.,Ball bushings comprise a cage, in which the balls are guided, along with the raceway segments and integral seals,Further axial securing is often unnecessary when linear ball bearings and linear plain bearings are pressed into a J7 or J6 tolerance hole.
Liens connexes
- Ewellix Makers in Motion LBHT 20 A-2LS Bearing with 20 mm ID 32 mm OD 2650 N 2650 N
- Ewellix Makers in Motion Bearing Unit LUHR 25-2LS LUHR Series
- Ewellix Makers in Motion Bearing Unit LUNE12 D-2LS LUNE Series
- Ewellix Makers in Motion LBBR 25-2LS Bearing with 25 mm ID 35 mm OD 2120 N 1560 N
- Ewellix Makers in Motion Bearing Unit LUHR 20-2LS LUNE Series
- Ewellix Makers in Motion Bearing Unit LUHR 30-2LS LUNE Series
- Ewellix Makers in Motion Bearing Unit LUHR 16-2LS LUNE Series
- Ewellix Makers in Motion Bearing Unit LUHR 12-2LS LUHR Series