Ewellix Makers in Motion LBCR20 D Bearing with 20 mm ID 32 mm OD 2240 N 2040 N
- N° de stock RS:
- 284-9712
- Référence fabricant:
- LBCR20 D
- Fabricant:
- Ewellix Makers in Motion
Visuel non contractuel
Offre groupée disponible
Sous-total (1 unité)*
89,42 €
(TVA exclue)
108,20 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 10 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 89,42 € |
| 5 - 9 | 85,84 € |
| 10 + | 84,05 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 284-9712
- Référence fabricant:
- LBCR20 D
- Fabricant:
- Ewellix Makers in Motion
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Ewellix Makers in Motion | |
| Product Type | Bearing | |
| Outside Diameter | 32 mm | |
| Length | 45mm | |
| Inside Diameter | 20 mm | |
| End Type | Shielded | |
| Dynamic Load Rating | 2240N | |
| Material | Steel | |
| Static Load Rating | 2040N | |
| Closure Type | Closed | |
| Base to Bore Centerline | 16mm | |
| Standards/Approvals | No | |
| Series | LBCR | |
| Sélectionner tout | ||
|---|---|---|
Marque Ewellix Makers in Motion | ||
Product Type Bearing | ||
Outside Diameter 32 mm | ||
Length 45mm | ||
Inside Diameter 20 mm | ||
End Type Shielded | ||
Dynamic Load Rating 2240N | ||
Material Steel | ||
Static Load Rating 2040N | ||
Closure Type Closed | ||
Base to Bore Centerline 16mm | ||
Standards/Approvals No | ||
Series LBCR | ||
- Pays d'origine :
- DE
SKF Linear Bearings
Standard SKF linear bearings can be used to construct linear guidance systems over a wide variety of applications. These bearings are manufactured to ISO 10285 standards. SKF linear ball bearings have the advantage of being corrosion resistant due to a corrosion inhibiting preservative.
Can be used on a wide variety of applications
ISO 10285
Coated with a corrosion inhibitor
SKF Linear Ball Bushings & Sets
Closed ball bushings and plain bearings for XY positioning, pick and place applications and precision linear motion systems.,Plain bearings to be used in heavy shock, vibration, high acceleration or high speed situations which are unsuitable for linear ball bearings.,Note that higher frictional forces must be expected with linear plain bearings.,Ball bushings comprise a cage, in which the balls are guided, along with the raceway segments and integral seals,Further axial securing is often unnecessary when linear ball bearings and linear plain bearings are pressed into a J7 or J6 tolerance hole.
Liens connexes
- Ewellix Makers in Motion LBCR20 D-2LS Bearing with 20 mm ID 32 mm OD 2240 N 2040 N
- Ewellix Makers in Motion LPAR 20 Bearing with 32 mm OD
- Ewellix Makers in Motion LUNE12 D-2LS
- Ewellix Makers in Motion LUHR 30
- Ewellix Makers in Motion LUHR 25
- Ewellix Makers in Motion LUHR 20
- Ewellix Makers in Motion Bearing Unit LUHR 16 LUHR Series
- Ewellix Makers in Motion Bearing Unit LUHR 12 LUHR Series