Ewellix Makers in Motion LBBR 16-2LS Bearing with 16 mm ID 24 mm OD 930 N 630 N
- N° de stock RS:
- 284-9100
- Référence fabricant:
- LBBR 16-2LS
- Fabricant:
- Ewellix Makers in Motion
Offre groupée disponible
Sous-total (1 unité)*
31,81 €
(TVA exclue)
38,49 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 16 unité(s) prête(s) à être expédiée(s)
- Plus 5 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 31,81 € |
| 5 - 9 | 30,55 € |
| 10 + | 29,90 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 284-9100
- Référence fabricant:
- LBBR 16-2LS
- Fabricant:
- Ewellix Makers in Motion
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Ewellix Makers in Motion | |
| Product Type | Bearing | |
| Outside Diameter | 24 mm | |
| Length | 30mm | |
| Inside Diameter | 16 mm | |
| End Type | Sealed | |
| Dynamic Load Rating | 930N | |
| Base to Bore Centerline | 12mm | |
| Static Load Rating | 630N | |
| Material | Steel | |
| Closure Type | Closed | |
| Standards/Approvals | No | |
| Series | LBBR | |
| Sélectionner tout | ||
|---|---|---|
Marque Ewellix Makers in Motion | ||
Product Type Bearing | ||
Outside Diameter 24 mm | ||
Length 30mm | ||
Inside Diameter 16 mm | ||
End Type Sealed | ||
Dynamic Load Rating 930N | ||
Base to Bore Centerline 12mm | ||
Static Load Rating 630N | ||
Material Steel | ||
Closure Type Closed | ||
Standards/Approvals No | ||
Series LBBR | ||
Statut RoHS non applicable
- Pays d'origine :
- DE
LBBR Ball Bushings With Double Seal - Closed
Conforms to Series 1 of ISO10285
Sealed bearings fitted with double lip seals
SKF Linear Ball Bushings & Sets
Closed ball bushings and plain bearings for XY positioning, pick and place applications and precision linear motion systems.,Plain bearings to be used in heavy shock, vibration, high acceleration or high speed situations which are unsuitable for linear ball bearings.,Note that higher frictional forces must be expected with linear plain bearings.,Ball bushings comprise a cage, in which the balls are guided, along with the raceway segments and integral seals,Further axial securing is often unnecessary when linear ball bearings and linear plain bearings are pressed into a J7 or J6 tolerance hole.
Liens connexes
- Ewellix LBBR 16, Bearing with 24mm Outside Diameter
- Ewellix LBBR 30-2LS, Bearing with 40mm Outside Diameter
- Ewellix LBBR 10-2LS, Bearing with 17mm Outside Diameter
- Ewellix LBBR 12-2LS, Bearing with 19mm Outside Diameter
- Ewellix LBBR 20-2LS, Bearing with 28mm Outside Diameter
- Ewellix LBBR 25-2LS, Bearing with 35mm Outside Diameter
- Ewellix Makers in Motion LBBR 12-2LS/HV6, Bearing with 19mm Outside Diameter
- Ewellix Makers in Motion LBBR 20-2LS/HV6, Bearing with 28mm Outside Diameter