INA KBS25-PP-AS Bearing with 25 mm ID 40 mm OD 2950 N 2850 N
- N° de stock RS:
- 172-1235
- Référence fabricant:
- KBS25-PP-AS
- Fabricant:
- INA
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
94,03 €
(TVA exclue)
113,78 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 1 unité(s) expédiée(s) à partir du 28 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 94,03 € |
| 5 - 9 | 90,29 € |
| 10 + | 88,38 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 172-1235
- Référence fabricant:
- KBS25-PP-AS
- Fabricant:
- INA
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | INA | |
| Product Type | Bearing | |
| Length | 58mm | |
| End Type | Sealed | |
| Dynamic Load Rating | 2950N | |
| Static Load Rating | 2850N | |
| Closure Type | Closed | |
| Base to Bore Centerline | 20mm | |
| Series | KBS | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque INA | ||
Product Type Bearing | ||
Length 58mm | ||
End Type Sealed | ||
Dynamic Load Rating 2950N | ||
Static Load Rating 2850N | ||
Closure Type Closed | ||
Base to Bore Centerline 20mm | ||
Series KBS | ||
Standards/Approvals No | ||
Schaeffler KBS Series Bearing, 25mm Inside Diameter, 40mm Outside Diameter - KBS25-PP-AS
This bearing is a sealed rotary component designed to support radial loads in Compact assemblies. It features a sealed end type closure to limit contamination ingress and is suited to applications where a low profile, enclosed unit is required. The product is intended for use within machinery that demands contained lubrication and consistent rotational support.
Features and Benefits:
• Dynamic capacity 2950N delivering sustained operational load handling
• Static capacity 2850N resisting Peak or shock loads
• Closed closure type limiting particle ingress during operation
• Base to bore centreline 20mm enabling precise shaft alignment
• Sealed end type reducing maintenance frequency and lubricant loss
• Static capacity 2850N resisting Peak or shock loads
• Closed closure type limiting particle ingress during operation
• Base to bore centreline 20mm enabling precise shaft alignment
• Sealed end type reducing maintenance frequency and lubricant loss
Applications
• Suitable for rotary shafts in Compact industrial gearboxes
• Ideal for driven rollers in material-handling equipment
• Used with small motor assemblies requiring enclosed bearings
• Can be used for pivot joints in automated machinery
• Ideal for driven rollers in material-handling equipment
• Used with small motor assemblies requiring enclosed bearings
• Can be used for pivot joints in automated machinery
What internal shaft size will the component accept?
It accepts shafts that match a 25mm inside diameter.
How does the unit perform under sudden load increases?
It offers a static load capacity of 2850N to withstand short-term Peak loads.
What outer envelope must be allowed in housing design?
The unit requires a 40mm outside diameter clearance for correct installation.
How much axial length should a designer allocate along the shaft?
Allocate 58mm of axial space to accommodate the full bearing length.
Liens connexes
- INA KB25-PP Bearing with 25 mm ID 40 mm OD 2950 N 2850 N
- INA KB25-PP-AS Bearing with 25 mm ID 40 mm OD 2950 N 2850 N
- INA KB25 Bearing with 25 mm ID 40 mm OD 2950 N 2850 N
- INA KBO25-PP-AS Bearing with 25 mm ID 40 mm OD 2850 N 2300 N
- INA KSO25-PP Bearing with 25 mm ID 40 mm OD 3950 N 4300 N
- INA KS25-PP Bearing with 25 mm ID 40 mm OD 3950 N 4300 N
- INA PAB40-PP-AS Bearing with 40 mm ID 62 mm OD 600000 N
- INA KH25-PP Bearing with 25 mm ID 35 mm OD 2420 N 2130 N