Renesas Electronics Line Transceiver, Differential, Non-Inverting, 8-Pin MSOP

Voir la catégorie
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
N° de stock RS:
256-1602
Référence fabricant:
ISL32492EIUZ-T7A
Fabricant:
Renesas Electronics
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Renesas Electronics

Product Type

Line Transceiver

Logic Family

BiCMOS

Logic Function

Transceiver

IC Type

Transceiver

Input Type

RS422/RS485

Output Type

Differential

Polarity

Non-Inverting

Package Type

MSOP

Pin Count

8

Minimum Supply Voltage

4.5V

Maximum High Level Output Current

4.5mA

Maximum Supply Voltage

5.5V

Maximum Low Level Output Current

110μA

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

85°C

Width

4 mm

Height

1.75mm

Standards/Approvals

RoHS

Series

ISL32492E

Length

5mm

Supply Current

2.3mA

Automotive Standard

No

The Renesas RS-485/RS-422 Transceiver is fault protected, 5V powered, differential transceivers that exceed the RS-485 and RS-422 standards for balanced communication. The RS-485 transceiver pins (driver outputs and receiver inputs) are fault protected up to ±60V and are protected against ±16.5kV ESD strikes without latch-up. Additionally, the extended Common-Mode Range (CMR) allows these transceivers to operate in environments with common-mode voltages up to ±25V (>2x the RS-485 requirement), making this fault protected RS-485 family one of the most robust on the market.

Fault protected RS-485 bus pins up to ±60V

Extended common-mode range of ±25V (more than twice the range required for RS-485)

1/4 unit load for up to 128 devices on the bus

±16.5kV HBM ESD protection on RS-485 bus pins

RS-485 data rates of 250kbps to 15Mbps

Liens connexes

Recently viewed