STMicroelectronics 1-Channel RS485/RS422 Transceiver, Differential, 8-Pin SO

Offre groupée disponible

Sous-total 10 unités (conditionné en bande continue)*

15,14 €

(TVA exclue)

18,32 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • Plus 1 900 unité(s) expédiée(s) à partir du 27 février 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
10 - 951,514 €
100 - 4951,066 €
500 - 9951,036 €
1000 +0,942 €

*Prix donné à titre indicatif

Options de conditionnement :
N° de stock RS:
189-2037P
Référence fabricant:
ST3485EIDT
Fabricant:
STMicroelectronics
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

STMicroelectronics

Product Type

RS485/RS422 Transceiver

Logic Function

Transceiver

IC Type

Line Transceiver IC

Number of Channels

1

Input Type

Differential

Output Type

Differential

Mount Type

Surface

Package Type

SO

Pin Count

8

Minimum Supply Voltage

3V

Maximum High Level Output Current

4mA

Maximum Supply Voltage

3.6V

Maximum Low Level Output Current

4mA

Maximum Propagation Delay Time @ CL

50ns

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

125°C

Standards/Approvals

AEC Q001, AEC Q100, AEC Q002, IEC 61000-4-2, AEC Q003

Series

ST3485EI

Height

1.75mm

Length

5mm

Width

6.2 mm

Automotive Standard

AEC-Q100, AEC-Q1, AEC-Q2, AEC-Q3

Supply Current

2.2mA

Pays d'origine :
MA
The ST3485EB/EC/EI/EIY device is ±15 kV ESD protected, 3.3 V low power transceiver for RS-485 and RS-422 communications. The device contains one driver and one receiver in half duplex configuration. The ST3485E device transmits and receives at a guaranteed data rate of at least 12 Mbps. All transmitter outputs and receiver inputs are protected to ±15 kV air discharge. The driver is short-circuit current limited and is protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a high impedance state.

ESD protection

±15 kV air discharge

±8 kV contact discharge

Operate from a single 3.3 V supply - no charge pump required

Interoperable with 5 V logic

1 μA low current shutdown mode max.

Guaranteed 12 Mbps data rate

-7 to 12 V common mode input voltage range

Half duplex versions available

Industry standard 75176 pinout

Current limiting and thermal shutdown for driver overload protection

Guaranteed high receiver output state for floating inputs with no signal present

Allow up to 64 transceivers on the bus

Available in SO8 package