STMicroelectronics Line Transceiver, Push Pull, 12-Pin VFDFPN
- N° de stock RS:
- 163-9771P
- Référence fabricant:
- L6362ATR
- Fabricant:
- STMicroelectronics
Sous-total 5 unités (conditionné en bande continue)*
11,38 €
(TVA exclue)
13,77 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 2 840 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 5 + | 2,276 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 163-9771P
- Référence fabricant:
- L6362ATR
- Fabricant:
- STMicroelectronics
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | STMicroelectronics | |
| Product Type | Line Transceiver | |
| IC Type | Line Transceiver IC | |
| Input Type | Single Ended | |
| Output Type | Push Pull | |
| Mount Type | Surface | |
| Package Type | VFDFPN | |
| Pin Count | 12 | |
| Minimum Supply Voltage | 7V | |
| Maximum High Level Output Current | 310mA | |
| Maximum Supply Voltage | 36V | |
| Maximum Propagation Delay Time @ CL | 400ns | |
| Minimum Operating Temperature | -40°C | |
| Maximum Low Level Output Current | -310mA | |
| Maximum Operating Temperature | 125°C | |
| Height | 0.9mm | |
| Width | 3 mm | |
| Length | 3mm | |
| Series | L6362A | |
| Standards/Approvals | IEC 61000-4-4, EN60947-5-2, IEC 61000-4-2 | |
| Supply Current | 2.3mA | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque STMicroelectronics | ||
Product Type Line Transceiver | ||
IC Type Line Transceiver IC | ||
Input Type Single Ended | ||
Output Type Push Pull | ||
Mount Type Surface | ||
Package Type VFDFPN | ||
Pin Count 12 | ||
Minimum Supply Voltage 7V | ||
Maximum High Level Output Current 310mA | ||
Maximum Supply Voltage 36V | ||
Maximum Propagation Delay Time @ CL 400ns | ||
Minimum Operating Temperature -40°C | ||
Maximum Low Level Output Current -310mA | ||
Maximum Operating Temperature 125°C | ||
Height 0.9mm | ||
Width 3 mm | ||
Length 3mm | ||
Series L6362A | ||
Standards/Approvals IEC 61000-4-4, EN60947-5-2, IEC 61000-4-2 | ||
Supply Current 2.3mA | ||
Automotive Standard No | ||
The L6362A is an IO-Link and SIO mode transceiver device compliant to PHY2 (3-wire connection) supporting COM1 (4.8 kbaud), COM2 (38.4 kbaud) and COM3 (230.4 kbaud) modes. The output stage can be configured as high-side, low-side or push-pull and it can drive resistive, capacitive and inductive loads. It can be connected to a sensor chip with the industrial 24 V environment.
Fully protected
Reverse polarity
Overload with cut-off function
Overtemperature
Undervoltage and overvoltage
GND and VCC open wire
-40 to +125 °C operating ambient temperature
Selectable output stages:high-side, low-side, push-pull
Suitable to drive L, C and R loads
30 μF output load drive capability
Switching capability of inductors up to 500 mJ
Wake-up detection supported
Fast demagnetization of inductive loads