Telemecanique Sensors XCMD Series Roller Plunger Limit Switch, 1 NO/1 NC, IP66, IP67, IP68, Zinc Alloy Housing, 400V

N° de stock RS:: 814-8006
Référence fabricant:: XCMD2502L2
Fabricant:: Telemecanique Sensors

Telemecanique Sensors XCMD Series Roller Plunger Limit Switch, 1 NO/1 NC, IP66, IP67, IP68, Zinc Alloy Housing, 400V

Sous-total (1 unité)*

87,60 €

(TVA exclue)

106,00 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

Stock limité

Plus 10 unité(s) expédiée(s) à partir du 07 novembre 2026
Plus 8 unité(s) expédiée(s) à partir du 07 novembre 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	87,60 €

*Prix donné à titre indicatif

N° de stock RS:: 814-8006
Référence fabricant:: XCMD2502L2
Fabricant:: Telemecanique Sensors

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Telemecanique Sensors
	Product Type	Limit Switch
	Actuator Type	Roller Plunger
	Contact Configuration	1 NO/1 NC
	IP Rating	IP66, IP67, IP68
	Housing Material	Zinc Alloy
	Contact Type	Slow Break
	Terminal Type	Cable
	Series	XCMD
	Minimum Operating Temperature	-25°C
	Switching AC Voltage	400V
	Maximum Operating Temperature	70°C
	Width	30mm
	Standards/Approvals	UL, RoHS, IEC, EN, CSA, CE, CCC
	Length	50mm
	Depth	16mm
	Hazardous Area Certification	No
	Operating Force	7N
	Mechanical Life	10000000Cycles
	Mounting Orientation	Vertical

	Sélectionner tout
	Marque Telemecanique Sensors
	Product Type Limit Switch
	Actuator Type Roller Plunger
	Contact Configuration 1 NO/1 NC
	IP Rating IP66, IP67, IP68
	Housing Material Zinc Alloy
	Contact Type Slow Break
	Terminal Type Cable
	Series XCMD
	Minimum Operating Temperature -25°C
	Switching AC Voltage 400V
	Maximum Operating Temperature 70°C
	Width 30mm
	Standards/Approvals UL, RoHS, IEC, EN, CSA, CE, CCC
	Length 50mm
	Depth 16mm
	Hazardous Area Certification No
	Operating Force 7N
	Mechanical Life 10000000Cycles
	Mounting Orientation Vertical

Non conforme

Pays d'origine :: ID

Telemecanique Sensors XCMD Series Limit Switch, 7N Operating Force, IP66/IP67/IP68 - XCMD2502L2

This limit switch is a Compact actuator designed to detect mechanical movement and provide dry-contact signalling in industrial control systems. It is intended for vertical mounting where a roller-style plunger interacts with moving parts to open or close electrical circuits. The device offers environmental sealing suitable for harsh conditions and supports connection via an attached cable for straightforward integration into AC control circuits.

Features and Benefits:

• Roller plunger actuator reduces wear and supports repeated activations • 1NO and 1NC slow-break contacts permit controlled switching of circuits • Enclosure meets multiple ingress ratings for wet environments • Zamak housing provides sturdy mechanical protection for internals • Operating force of 7N enables consistent actuation with low effort • Rated for up to 400V AC switching of control loads

Applications

• Suitable for conveyor end-of-travel detection in assembly lines • Ideal for position feedback on industrial presses and lifts • Used for safety interlock monitoring on access panels • Can be used for limit detection in material-handling systems

What temperature range can it operate within on-site?

It functions across a working span from -25 °C up to 70 °C, accommodating typical factory ambient conditions.

How Durable is the mechanism under continuous cycling?

The switch is specified for a mechanical life of 10,000,000 cycles, allowing long service in high-cycle applications.

What certification standards does it meet for installation?

It carries multiple approvals including UL, RoHS, IEC, EN, CSA, CE and CCC for compliance with diverse regulatory regimes.

How is the unit mounted and oriented for correct operation?

It is designed for vertical mounting to align the roller plunger with the actuated moving element.

What form of electrical termination is provided for wiring?

The device uses a cable-style Terminal for direct wiring into control circuits.