Telemecanique Sensors OsiSense XC Series Roller Plunger Limit Switch, 1 NO/1 NC, IP66, IP69, Zamak Housing, 250V ac, 1A
- N° de stock RS:
- 609-6631
- Numéro d'article Distrelec:
- 304-01-370
- Référence fabricant:
- XCMD2102M12
- Fabricant:
- Telemecanique Sensors
Sous-total (1 unité)*
103,60 €
(TVA exclue)
125,36 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stock limité
- 17 restante(s), prêt à être expédié
- Plus 96 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 103,60 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 609-6631
- Numéro d'article Distrelec:
- 304-01-370
- Référence fabricant:
- XCMD2102M12
- Fabricant:
- Telemecanique Sensors
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Telemecanique Sensors | |
| Product Type | Limit Switch | |
| Actuator Type | Roller Plunger | |
| IP Rating | IP66, IP69 | |
| Contact Configuration | 1 NO/1 NC | |
| Housing Material | Zamak | |
| Contact Type | Snap Action | |
| Switching Current | 1A | |
| Terminal Type | M12 | |
| Series | OsiSense XC | |
| Minimum Operating Temperature | -25°C | |
| Switching DC Voltage | 24V dc | |
| Switching AC Voltage | 250V ac | |
| Maximum Operating Temperature | 70°C | |
| Standards/Approvals | UL, IEC 60204-1, CCC, CSA, EN 60204-1 | |
| Length | 50mm | |
| Depth | 16mm | |
| Width | 30mm | |
| Hazardous Area Certification | No | |
| Conduit Entry | M12 | |
| Operating Force | 7N | |
| Mechanical Life | 10000000Cycles | |
| Mounting Orientation | Multi Directional | |
| Sélectionner tout | ||
|---|---|---|
Marque Telemecanique Sensors | ||
Product Type Limit Switch | ||
Actuator Type Roller Plunger | ||
IP Rating IP66, IP69 | ||
Contact Configuration 1 NO/1 NC | ||
Housing Material Zamak | ||
Contact Type Snap Action | ||
Switching Current 1A | ||
Terminal Type M12 | ||
Series OsiSense XC | ||
Minimum Operating Temperature -25°C | ||
Switching DC Voltage 24V dc | ||
Switching AC Voltage 250V ac | ||
Maximum Operating Temperature 70°C | ||
Standards/Approvals UL, IEC 60204-1, CCC, CSA, EN 60204-1 | ||
Length 50mm | ||
Depth 16mm | ||
Width 30mm | ||
Hazardous Area Certification No | ||
Conduit Entry M12 | ||
Operating Force 7N | ||
Mechanical Life 10000000Cycles | ||
Mounting Orientation Multi Directional | ||
- Pays d'origine :
- ID
Telemecanique Sensors Osizense XC Series Limit Switch, IP66/IP69, 1 NO/1 NC Contact Configuration - XCMD2102M12
This limit switch is a Compact industrial position sensor designed for control and safety tasks in automated systems. It provides a mechanical contact output via a roller plunger actuator and is intended for environments where a small, robust switching device is required. The unit connects through an M12 conduit and is fitted with snap-action contacts to deliver fast, repeatable switching for machinery interfaces.
Features and Benefits:
• Snap-action contacts deliver fast, repeatable switching performance
• 1NO 1NC configuration supports dual control logic arrangements
• 24V DC 1A switching rating suits low-voltage control circuits
• Multi directional mounting allows flexible installation orientations
• Mechanical life of 10,000,000 cycles minimises maintenance intervals
• Zamak housing provides Durable protection against mechanical impact
• 1NO 1NC configuration supports dual control logic arrangements
• 24V DC 1A switching rating suits low-voltage control circuits
• Multi directional mounting allows flexible installation orientations
• Mechanical life of 10,000,000 cycles minimises maintenance intervals
• Zamak housing provides Durable protection against mechanical impact
Applications
• Suitable for end-of-travel detection on conveyor sorters
• Ideal for gate position monitoring in access control systems
• Used with low-voltage control relays in packaging machines
• Can be used for limit detection on automated assembly rigs
• Suitable for position feedback on material handling equipment
• Ideal for gate position monitoring in access control systems
• Used with low-voltage control relays in packaging machines
• Can be used for limit detection on automated assembly rigs
• Suitable for position feedback on material handling equipment
What Terminal and connection format does it use?
Electrical connection is via an M12 Terminal Interface that also serves as the conduit entry for streamlined cabling.
What environmental sealing is provided for washdown or dusty areas?
The enclosure meets IP66 and IP69 ingress protection levels to resist high-pressure washdowns and dust ingress.
Which temperature range will it operate within?
It functions reliably between -25°C and 70°C for typical industrial ambient conditions.
What standards approvals cover electrical safety and machine integration?
It holds approvals aligned with UL, IEC 60204-1, CCC, CSA, and EN 60204-1 for recognised safety and integration practices.
Liens connexes
- Telemecanique Sensors OsiSense XC Series Roller Plunger Limit Switch IP66 DPST, Zamak Zinc Alloy
- Telemecanique Sensors OsiSense XC Series Plunger Limit Switch IP66 240V ac, 3A
- Telemecanique Sensors OsiSense XC Series Roller Plunger Limit Switch IP66 240V ac, 3A
- Telemecanique Sensors OsiSense XC Series Plunger Limit Switch IP68 IP66
- Telemecanique Sensors OsiSense XC Series Plunger Limit Switch IP66 IP68 240V ac, 1.5A
- Telemecanique Sensors OsiSense XC Series Limit Switch Body IP66 400V
- Telemecanique Sensors OsiSense XC Series Limit Switch Body IP67 Zamak Housing 1.5A
- Telemecanique Sensors OsiSense XC Series Limit Switch 3P 400V ac Max