Telemecanique Sensors OsiSense XC Series Plunger Limit Switch, 1 NO/1 NC, IP66, IP67, Plastic Housing, 240V ac, 3A

N° de stock RS:: 447-3525
Numéro d'article Distrelec:: 136-30-878
Référence fabricant:: XCKT2110P16
Fabricant:: Telemecanique Sensors

Telemecanique Sensors OsiSense XC Series Plunger Limit Switch, 1 NO/1 NC, IP66, IP67, Plastic Housing, 240V ac, 3A

Sous-total (1 unité)*

119,20 €

(TVA exclue)

144,23 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

Stock limité

Plus 11 unité(s) expédiée(s) à partir du 10 août 2026
Plus 57 unité(s) expédiée(s) à partir du 10 août 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	119,20 €

*Prix donné à titre indicatif

N° de stock RS:: 447-3525
Numéro d'article Distrelec:: 136-30-878
Référence fabricant:: XCKT2110P16
Fabricant:: Telemecanique Sensors

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Telemecanique Sensors
	Actuator Type	Plunger
	Product Type	Limit Switch
	Contact Configuration	1 NO/1 NC
	IP Rating	IP66, IP67
	Housing Material	Plastic
	Contact Type	Snap Action
	Switching Current	3A
	Terminal Type	Screw Clamp
	Series	OsiSense XC
	Minimum Operating Temperature	-25°C
	Switching DC Voltage	250V dc
	Switching AC Voltage	240V ac
	Maximum Operating Temperature	70°C
	Standards/Approvals	CCC, CSA, REACH, RoHS, UL
	Depth	30mm
	Width	58mm
	Length	51mm
	Hazardous Area Certification	No
	Operating Force	45N
	Mechanical Life	15000000Cycles
	Conduit Entry	M16

	Sélectionner tout
	Marque Telemecanique Sensors
	Actuator Type Plunger
	Product Type Limit Switch
	Contact Configuration 1 NO/1 NC
	IP Rating IP66, IP67
	Housing Material Plastic
	Contact Type Snap Action
	Switching Current 3A
	Terminal Type Screw Clamp
	Series OsiSense XC
	Minimum Operating Temperature -25°C
	Switching DC Voltage 250V dc
	Switching AC Voltage 240V ac
	Maximum Operating Temperature 70°C
	Standards/Approvals CCC, CSA, REACH, RoHS, UL
	Depth 30mm
	Width 58mm
	Length 51mm
	Hazardous Area Certification No
	Operating Force 45N
	Mechanical Life 15000000Cycles
	Conduit Entry M16

Se connecter pour voir les modèles CAO

Statut RoHS : Exempté

Pays d'origine :: ID

Telemecanique Sensors Osizense XC Series Limit Switch, IP66/IP67, 45N Operating Force - XCKT2110P16

This limit switch is a Compact plunger-actuated device designed to detect position and control circuits in industrial automation environments. Housed in a plastic enclosure with ingress protection suitable for harsh conditions, it provides single-pole switching with a snap-action mechanism and screw-clamp terminals for electrical connections. The unit operates across a wide ambient temperature range and is intended for use where reliable mechanical switching and straightforward wiring are required.

Features and Benefits:

• Snap-action contacts deliver fast switching and clear state change
• 45 N actuation force reduces false trips from minor impacts
• 15 million-cycle mechanical life lowers maintenance frequency
• IP66/IP67 protection permits use in dusty and water-exposed areas
• Screw-clamp terminals enable secure, tool-friendly connections
• M16 conduit entry supports standard cable gland fittings

Applications

• Suitable for position sensing on conveyor end stops
• Ideal for limit detection on industrial presses
• Used with linear actuators in packaging machinery
• Can be used for safety interlocks on access panels
• Suitable for control feedback in material handling systems

What contact configurations are available for wiring layouts?

The device offers one normally open and one normally closed contact to accommodate both make-before-break and break-before-make circuit requirements.

Which supply voltages and currents can the switch handle?

It is rated for switching up to 250V DC at 3 A and up to 240V AC, allowing compatibility with common control voltages.

How does the enclosure material affect installation?

The plastic housing provides electrical insulation and reduces corrosion risk, making it suitable for non-metallic mounting environments.

Are there recognised safety or regulatory approvals for industrial deployment?

The product holds approvals including CCC, CSA, REACH, RoHS and UL for use where these standards are required.

What are the environmental limits for operation?

It is specified to function between -25 °C and 70 °C, supporting a broad range of indoor and protected outdoor applications.